Результаты поиска

Подготовленный экранированный круглый кабель с двумя 14-контактными гнездовыми разъемами (соединение 1:1), на 8 каналов, длина кабеля: 1 м

• Analogue controller for accurate process temperature control
• Burst firing control of heaters
• Control input optional with DC 0 ... 10 V, DC 4 ... 20 mA, 0 ... 10 kΩ
• Reverse action operation possible
• Rated operational voltage range up to 480 V
• Rated operational current is up to AC 50 A
• Zero cross switching
• Protected by varistors
• Temperature protection of the power semiconductors
• LED indications for supply, output status and alarm status
• Alarm indication on mains synchronisation failure
• Alarm indication on control input failure
• Alarm indication on over temperature of power semiconductors
• DIN-rail mountable
• BF 9250/0_2 to 10 A: Width 22.5 mm
BF 9250/0_2 to 25 A: Width 45 mm
BF 9250/0_2 to 50 A: Width 90 mm

• Analogue controller for accurate process temperature control
• Burst firing control of heaters
• Control input optional with DC 0 ... 10 V, DC 4 ... 20 mA, 0 ... 10 kΩ
• Reverse action operation possible
• Rated operational voltage range up to 480 V
• Rated operational current is up to AC 50 A
• Zero cross switching
• Protected by varistors
• Temperature protection of the power semiconductors
• LED indications for supply, output status and alarm status
• Alarm indication on mains synchronisation failure
• Alarm indication on control input failure
• Alarm indication on over temperature of power semiconductors
• DIN-rail mountable
• BF 9250/0_2 to 10 A: Width 22.5 mm
BF 9250/0_2 to 25 A: Width 45 mm
BF 9250/0_2 to 50 A: Width 90 mm

• According to IEC/EN 60 947-4-2, IEC/EN 60 947-4-3
• 1-, 2- and 3-pole models
• Load current up to 50 A
• For AC load up to 480 V
• Switching at zero crossing
• Protected by varistors
• As option temperature protection of the power semiconductors
with monitoring output
• Mounting on DIN-rail
• As option with control input X1 with low current consumption
e.g. to be controlled by a PLC
• As option up to 3 separate semiconductor contactors in one unit
• BF 9250: width 22.5 mm, 45 mm and 90 mm
BH 9250: width 45 mm, 67.5 mm and 112.5 mm

• According to IEC/EN 60 947-4-2, IEC/EN 60 947-4-3
• 1-, 2- and 3-pole models
• Load current up to 50 A
• For AC load up to 480 V
• Switching at zero crossing
• Protected by varistors
• As option temperature protection of the power semiconductors
with monitoring output
• Mounting on DIN-rail
• As option with control input X1 with low current consumption
e.g. to be controlled by a PLC
• As option up to 3 separate semiconductor contactors in one unit
• BF 9250: width 22.5 mm, 45 mm and 90 mm
BH 9250: width 45 mm, 67.5 mm and 112.5 mm

• According to IEC/EN 60 947-4-2, IEC/EN 60 947-4-3
• 1-, 2- and 3-pole models
• Load current up to 50 A
• For AC load up to 480 V
• Switching at zero crossing
• Protected by varistors
• As option temperature protection of the power semiconductors
with monitoring output
• Mounting on DIN-rail
• As option with control input X1 with low current consumption
e.g. to be controlled by a PLC
• As option up to 3 separate semiconductor contactors in one unit
• BF 9250: width 22.5 mm, 45 mm and 90 mm
BH 9250: width 45 mm, 67.5 mm and 112.5 mm

• According to IEC/EN 60 947-4-2, IEC/EN 60 947-4-3
• 1-, 2- and 3-pole versions
• Load current up to 50 A at TU = 40° C
• For AC load up to 530 V
• Switching at zero crossing, optionally immediate switching
• Protected by varistors
• Mounting on DIN-rail
• Widths: 22.5 mm, 45 mm and 90 mm