Результаты поиска

Запрос: «BI 9034»

Найдено результатов: 179
Артикул: 149034
  • Compact installation depth
  • High resolution up to 16 bits
  • Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses
  • Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial
  • Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull
  • Mechanical interfaces: face mount or servo flange, blind or through hollow shaft
  • Remote zero set possible
Артикул: 159034
  • Gauge measurement ranges from 0 ... 1 bar up to 0 ... 600 bar
  • No moving parts: No mechanical wear, fatigue-proof, maintenance-free
  • Stainless steel membrane
  • Various programmable switching functions
  • Digital outputs PNP or NPN, Analog output signal 4 … 20 mA or 0 … 10 V
  • Min/max pressure memory
  • Password protection
  • Selection of different pressure units for the display
  • IO-Link optional
Артикул: 949034
Тип расширенного изделия: UA16-30-10 230-240V 50Hz / 240-260V 60Hz
Идентификационный номер изделия: 1SBL181022R8810
Европейский товарный код (EAN): 3471522254887
Описание в каталоге: UA16-30-10 230-240V 50Hz / 240-260V 60Hz Contactor
Длинное описание: UA16 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 1 built-in auxiliary contact - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
Артикул: 1089034
SIMOTICS FD, LV-MOTOR, SC FORCED COOLED, IC416, IP55 DRIVEN BY SINAMICS BY STABILIZED POWER SUPPLY TEMP. CLASS 180(H) ACC. 155(F) PREMIUM EFFICIENCY SH 450, 6 POLES 690V / 50HZ, 1000 RPM, 670 KW
Артикул: 1090340
SIMOTICS FD, LV-MOTOR, SC FORCED COOLED, IC416, IP55 DRIVEN BY FOREIGN CONVERTER BY NON-STABILIZED POWER SUPPLY TEMP. CLASS 180(H) ACC. 155(F) HIGH EFFICIENCY SH 355, 6 POLES 500V / 50HZ, 1000 RPM, 380 KW
Артикул: 1090341
SIMOTICS FD, LV-MOTOR, SC FORCED COOLED, IC416, IP55 DRIVEN BY FOREIGN CONVERTER BY NON-STABILIZED POWER SUPPLY TEMP. CLASS 180(H) ACC. 155(F) HIGH EFFICIENCY SH 355, 6 POLES 500V / 50HZ, 750 RPM, 320 KW
Артикул: 1090342
SIMOTICS FD, LV-MOTOR, SC FORCED COOLED, IC416, IP55 DRIVEN BY FOREIGN CONVERTER BY NON-STABILIZED POWER SUPPLY TEMP. CLASS 180(H) ACC. 155(F) HIGH EFFICIENCY SH 355, 6 POLES 690V / 50HZ, 1000 RPM, 345 KW
Артикул: 1090343
SIMOTICS FD, LV-MOTOR, SC FORCED COOLED, IC416, IP55 DRIVEN BY FOREIGN CONVERTER BY NON-STABILIZED POWER SUPPLY TEMP. CLASS 180(H) ACC. 155(F) HIGH EFFICIENCY SH 355, 6 POLES 690V / 50HZ, 750 RPM, 295 KW
Артикул: 1090344
SIMOTICS FD, LV-MOTOR, SC FORCED COOLED, IC416, IP55 DRIVEN BY FOREIGN CONVERTER BY NON-STABILIZED POWER SUPPLY TEMP. CLASS 180(H) ACC. 155(F) HIGH EFFICIENCY SH 355, 6 POLES 460V / 60HZ, 1200 RPM, 400 KW
Ещё результаты