Результаты поиска

• According to IEC/EN 60 255-1, VDE 0435 part 303
• Detection of high or low-rpm / stand still (adjustable function)
• Large setting range 1 ... 120.000 IPM or
0.15 ... 20.000 Hz (10 ranges each)
• As option with input for NAMUR-sensors with sensor and
wire protection against interruption and short circuit
• Adjustable hysteresis 0.5 ... 50 %
• Adjustable start up time delay 0 ... 50 s, control with external contact
• Adjustable monitoring time for missing input signal at function
overfrequency; additional using as standstill level
• Programmable via termminals:
- Alarm delay of 0 ... 100 s
- with manual reset or auto reset
• LED-indication for auxiliary voltage, measuring input and output relay;
additional LED for indication of wire- / sensor failure at NAMUR-input
• Auxiliary voltages AC 230 V and DC 24 V in one unit
• 2 changeover contacts, closed circuit operation
• Open circuit operation on request
• As option with analogue output, proportionally to speed
• Device available with 2 response values and seperately controlled
output relays for under- and overfrequency see MK 9055N/5_ _
• MH 9055 with wide input range for auxiliary voltage
(AC/DC 24 ... 60 V or AC/DC 110 ... 230 V)
• 2 possible compact designs
MK 9055N: Width 22,5 mm
MH 9055: Width 45 mm

• According to IEC/EN 60 255-1, VDE 0435 part 303
• Detection of high or low-rpm / stand still (adjustable function)
• Large setting range 1 ... 120.000 IPM or
0.15 ... 20.000 Hz (10 ranges each)
• As option with input for NAMUR-sensors with sensor and
wire protection against interruption and short circuit
• Adjustable hysteresis 0.5 ... 50 %
• Adjustable start up time delay 0 ... 50 s, control with external contact
• Adjustable monitoring time for missing input signal at function
overfrequency; additional using as standstill level
• Programmable via termminals:
- Alarm delay of 0 ... 100 s
- with manual reset or auto reset
• LED-indication for auxiliary voltage, measuring input and output relay;
additional LED for indication of wire- / sensor failure at NAMUR-input
• Auxiliary voltages AC 230 V and DC 24 V in one unit
• 2 changeover contacts, closed circuit operation
• Open circuit operation on request
• As option with analogue output, proportionally to speed
• Device available with 2 response values and seperately controlled
output relays for under- and overfrequency see MK 9055N/5_ _
• MH 9055 with wide input range for auxiliary voltage
(AC/DC 24 ... 60 V or AC/DC 110 ... 230 V)
• 2 possible compact designs
MK 9055N: Width 22,5 mm
MH 9055: Width 45 mm