Siemens Building Technologies — . Модуль управления N 501, для жалюзи, комбинированный актуатор жалюзи/двоичный вход, выходы 4х230V AC 6A, 8 безпотенциальных входов, на DIN-рейку, 4 ТЕ - 5WG15011AB01 - 5WG1501-1AB01

МОДУЛЬ УПРАВЛЕНИЯ N 501, ДЛЯ ЖАЛЮЗИ, КОМБИНИРОВАННЫЙ АКТУАТОР ЖАЛЮЗИ/Модуль входов двоичных, ВЫХОДЫ 4Х230V AC 6A, 8 БЕЗПОТЕНЦИАЛЬНЫХ ВХОДОВ, НА DIN-РЕЙКУ, 4 ТЕ
Артикул «Первый ZIP»:139722
Артикул производителя:5WG1501-1AB01
Доп. код производителя:N 501/01
Наличие

Наличие

Только под заказ.
Ориентировочный срок поставки: от 14 дней.
Цена

Цена

Требуется запрос производителю.

Для уточнения цены нам необходимо связаться с производителем. Отправляйте запрос по почте, через корзину сайта или через форму заявки.

Ответим на Ваш запрос сегодня в течение дня.

Этот товар не поставляется торгующим организациям. Подробнее.
Доставка

Доставка

По всей России.
  • транспортной компанией на Ваш выбор
  • самовывоз из офиса в Санкт-Петербурге
  • бесплатная доставка до терминала “Деловые Линии” в Санкт-Петербурге
Узнайте, как мы работаем
Коммерческое предложение
Удобно для запроса одной позиции
Добавить в корзину

Товар в корзине.

Перейти в корзину
Удобно для запроса нескольких разных позиций
    • 8 inputs for DC or AC in the range from 12 to 230 V
    • 8 relay contact outputs locked in pairs against each other for controlling 4 × AC 230V sunblind drives
    • Contact rated voltage AC 230 V
    • Contact rated current 6 A, p.f. = 1
    • Electronics powered by a 230 V AC integrated power supply
    • Device functional even without bus connection or if the bus communication fails
    • Preset on delivery for direct output control for each blind button function via momentary contact switches connected to the inputs
    • Green LED to indicate standby
    • Key for switching between bus and direct mode
    • Yellow LED for indicating direct mode activated
    • Button for each relay contact output, for switching the output in direct mode while the button is held down
    • LED per input to indicate the relevant signal status
    • Selectable function for each input when using the ETS:

    • Switching status, send binary value
    • Switching on leading edge, switching Short/Long
    • 1-pushbutton dimming, sunblind control, group control
    • 1-bit/8-bit scene control
    • 8-bit/16-bit value leading edge, Short/Long
    • 16-bit floating point value leading edge, Short/Long

    • Or for each pair of inputs:

    • Acting directly on the corresponding outputs as blind button
    • 2-button dimming with stop telegram or with cyclical sending
    • 2-pushbutton sunblind control

    • Selectable blocking of each input via a corresponding blocking object
    • Sending of input objects after change
    • Selectable cyclical input object sending
    • Individual or shared configuration of actuator channels
    • Communication objects for each blind channel for driving the sun protection into the end positions or for stopping the procedure and adjusting the blind slats in steps
    • Communication objects for setting position of slats and blinds in percentage information
    • Automatic opening of the blind slats to a preconfigured nominal setting after uninterrupted driving down of the blind from the top to the bottom end position, with integrated 1-bit scene control for storing and calling up (reproduction) of 2 interim blind and slat settings
    • Integrated 1-bit/8-bit scene control, 8 scenes can be integrated per channel
    • Optional "Sun" object for integration in a sunlight tracking control system
    • Differentiation between automatic and manual mode and with automatic switchover from automatic to manual mode for the channel in question by pressing a bus button for manual control of the corresponding sun protection
    • Manual mode taking precedence over automatic position commands
    • Optional central command for each device or each channel for switching the relevant channels to automatic mode and driving the sun protection into the up or down end position
    • Alarm: move to safety position, Locking in this position for as long as alarm is active
    • Travel lock (e. g. for cleaning the outer shutter/blinds)
    • Status objects for each channel for querying or for automatic sending of sun protection and slat settings as a percentage value
    • Optional status objects for reporting that the up or down position has been reached
    • Integrated bus coupling unit
    • Bus connection via bus terminal or contact system to data rail
    • Modular installation devices for mounting on TH35 EN 60715 mounting rail
  • Ширина в единицах DIN8 MW
  • Технические характеристикиA6V10416558.pdf

О компании Siemens Building Technologies

Siemens Building Technologies - подразделение концерна Siemens AG.

Департамент «Автоматизация и безопасность зданий» является одним из крупнейших поставщиков оборудования и решений для обеспечения безопасности и поддержания комфортных условий в зданиях. Посредством автоматизации систем жизнеобеспечения, предназначенных для производства, распределения и потребления энергии внутри здания для людей создаются комфортные условия по температуре, влажности, качеству воздуха, освещённости помещений.

Продукция Департамента включает в себя полный спектр оборудования и устройств:

датчики,  термостаты, регулирующие клапаны, приводы воздушных заслонок, частотные преобразователи, различные контроллеры, в том числе для ОЕМ-производителей все необходимое для построения  противопожарной безопасности в зданиях и сооружениях: системы пожарной сигнализации, управления пожаротушением и система сбора и обработки информации

Являясь лидером по ... Читать далее...