Siemens Building Technologies — . Модуль управления N 502/02, для жалюзи, комбинированный актуатор жалюзи/двоичный вход, выходы 8х230V AC 16A, 8 безпотенциальных входов, на DIN-рейку, 4 ТЕ - 5WG15021AB02 - 5WG1502-1AB02

МОДУЛЬ УПРАВЛЕНИЯ N 502/02, ДЛЯ ЖАЛЮЗИ, КОМБИНИРОВАННЫЙ АКТУАТОР ЖАЛЮЗИ/Модуль входов двоичных, ВЫХОДЫ 8Х230V AC 16A, 8 БЕЗПОТЕНЦИАЛЬНЫХ ВХОДОВ, НА DIN-РЕЙКУ, 4 ТЕ
Артикул «Первый ZIP»:139717
Артикул производителя:5WG1502-1AB02
Доп. код производителя:N 502/02
Наличие

Наличие

Только под заказ.
Ориентировочный срок поставки: от 14 дней.
Цена

Цена

Требуется запрос производителю.

Для уточнения цены нам необходимо связаться с производителем. Отправляйте запрос по почте, через корзину сайта или через форму заявки.

Ответим на Ваш запрос завтра 19.04.2024 в течение дня.

Этот товар не поставляется торгующим организациям. Подробнее.
Доставка

Доставка

По всей России.
  • транспортной компанией на Ваш выбор
  • самовывоз из офиса в Санкт-Петербурге
  • бесплатная доставка до терминала “Деловые Линии” в Санкт-Петербурге
Узнайте, как мы работаем
Коммерческое предложение
Удобно для запроса одной позиции
Добавить в корзину

Товар в корзине.

Перейти в корзину
Удобно для запроса нескольких разных позиций
    • 8 inputs AC/DC 12...230 V
    • 8 relay contact outputs
    • Rated contact voltage AC 230 V
    • Rated contact operating current 16 A, p.f. = 1
    • Electronics power supply via an integrated power supply unit for AC 230 V
    • Device functional even without bus connection or if bus voltage absent or bus communication interrupted or not yet activated
    • Green LED to indicate operational readiness
    • Push button to switch between bus and direct mode
    • Yellow LED to indicate direct mode activated
    • Push button for each output to switch the output in direct mode via a toggling function by a short actuation and for changing the output mode between remote control relay and time switch relay by holding down the push button for some seconds
    • 1 red LED per output to indicate the switching state
    • 1 red LED per input to indicate the current signal state
    • Device preset at the factory for direct switching of an output through a toggling function via the input of the same name
    • Selectable function for each input when using the Engineering Tool Software (ETS):

    • Switching status / binary value transmission
    • Switching, short / long operation
    • Single button dimming, single button sun protection control, 1-button group control (sequence control)
    • 1-bit scene control
    • 8-bit scene control, 8-bit value, edge-triggered, 8-bit value, short / long operation
    • 16-bit floating point value, edge-triggered, 16-bit value, short / long operation, 16-bit value, edge-triggered, 16-bit floating point value, short / long operation
    • Selectable function for each pair of inputs: 2-button dimming with stop telegram, 2-pushbutton shutter/blind control
    • Selectable blocking / releasing of each input via a corresponding blocking object
    • Sending of the input objects after a change of status
    • Selectable logic operation (AND/OR) for one input with a further communication object and with variable start value of the logic operation at bus voltage recovery

    • Setting by means of the ETS, whether all outputs are to be configured identically or individually
    • Selectable mode for each output (normal mode, time switch mode)
    • Optional addition of a night mode object for each output for time-limited switching On of the output (and hence the illumination) at night
    • Variable On and Off delay times for each output
    • Variable On period in night mode or in time switch mode
    • Selectable warning signal prior to imminent switching-off by means of three-times short off and on switching (flashing) in night mode or in time switch mode
    • Status object for reporting direct mode
    • Optional status object per output for status reporting
    • Sending of status objects on request and/or automatically after a change
    • Integrated 8-bit scene control and linking of each output with up to 8 scenes
    • Selectable switching state for each output at mains or bus power failure as well as after bus or mains voltage recovery
    • Integrated bus coupling units with only half a standard bus load
    • Bus connection via bus terminal or contact system to data rail
    • Modular installation devices for mounting on TH35 EN 60715 mounting rail
  • Ширина в единицах DIN8 MW
  • Технические характеристикиA6V10416559.pdf

О компании Siemens Building Technologies

Siemens Building Technologies - подразделение концерна Siemens AG.

Департамент «Автоматизация и безопасность зданий» является одним из крупнейших поставщиков оборудования и решений для обеспечения безопасности и поддержания комфортных условий в зданиях. Посредством автоматизации систем жизнеобеспечения, предназначенных для производства, распределения и потребления энергии внутри здания для людей создаются комфортные условия по температуре, влажности, качеству воздуха, освещённости помещений.

Продукция Департамента включает в себя полный спектр оборудования и устройств:

датчики,  термостаты, регулирующие клапаны, приводы воздушных заслонок, частотные преобразователи, различные контроллеры, в том числе для ОЕМ-производителей все необходимое для построения  противопожарной безопасности в зданиях и сооружениях: системы пожарной сигнализации, управления пожаротушением и система сбора и обработки информации

Являясь лидером по ... Читать далее...