Tecsis — with External Thread: 0...1 kN to 0...100 kN F2216

Miniature Tension/Compression Force Transducer designed to be installed in applications with limited space. The model F2216 series can be used to measure tension- as well as compression force. It is available in measuring ranges from 1 kN up to 100 kN. One special characteristic of this load cell is the very compact design with a small diameter due to the high capacity up to 100 kN.

Features

• For tension and compression force measurements
• Very compact small dimensions
• Simple force introduction
• For forces starting from 1 kN
• Accuracy 0.5% of full scale value
• Simple installation
• Protection class IP 65

0...1 kN to 0...100 kN

Application

This force transducer is used in applications with limited fitting space and the necessity to measure directly in the force line. For example to measure the actual force in ropes and rods. The force is applied to this force transducer via threaded bolts, which are located on each side of the cylindrical body. The force application has to be centrically, torsion and bending moments are to be avoided. You can find the force transducer for example in Measurement and control facilities, cable force measurements and test devices.