Tecsis — Standard: from 91 kg to 2268 kg F3270

This typical load cell in shear beam design is constructed to have a high accuracy of 0,04% (optionally 0,02%) of the Full Scale. The Model F3270 series can be used to measure static compression or tension forces. It is available for nominal loads in the range of 91 to 2268 kg.

Features

• Designed for the weighing of loads
• Also for tension or compression force measurements
• Typical shear beam design
• Accuracy of 0,04% full scale, optional 0,02% full scale
• Capacities starting from 91 kg 
• Force applied through a blind hole or through bore-hole
• Protection class IP 67

0...91 kg up to 0...2268 kg

Application

Those reasonably priced force transducers are used in numerous application with the need for high accuracy. The high accuracy allows to use the model F3270 series in weighing technology. The force transducers can also be used to measure static compression or tension forces. The bending beam is is mounted by using the two fastening bore holes on the cable side. The force is applied at the opposite side, vertically to theaxis of load cell via the provided through-hole or the blind hole. It is also possible to provide a version of the loading hole with half-thread. Because of the stainless steel construction and improved potting compound, they suit for the use in tough environments. The special calibration (mV/V/Ohm) allows to pass on corner balancing when using several load cells.