Tecsis — Test Set for Measuring of Electrode Forces: 10 kN; 20 kN FSK01
Наличие
Цена
Для уточнения цены нам необходимо связаться с производителем. Отправляйте запрос по почте, через корзину сайта или через форму заявки.
Ответим на Ваш запрос в течение 5 дней.
Доставка
- транспортной компанией на Ваш выбор
- самовывоз из офиса в Санкт-Петербурге
- бесплатная доставка до терминала “Деловые Линии” в Санкт-Петербурге
The test set can be used to check electrode force in spot-welding equipment. The test set consists of a load cell and a display unit. To check the forces acting between the electrodes, the load cell is held between the electrodes. The concave force transfer surfaces centre the load cell. When the welding electrodes come together, the magnitude of the applied force can be read off on the display unit. The load cell is of shear force construction and therefore insensitive to transverse forces and torques. It has a measuring range of 0…10 kN. The output signal is connected to the handheld display unit via a cable. This display unit carries the voltage supply for the transducer. Alternatively, the supply can be taken from a PLC.
The proven tecsis thin-film sensors are implanted in this type of load cell too. The sensor, which is welded in via laser, has all advantages of the conventional bonded foil strain gauges, but without having their substantial disadvantages (temperature drifts of the glue and creeping
Features
- Robust design
- Easy to handle
- Max./Min. value memory
- Illuminable large display
- Low measurement uncertainty
- Electrode diameters 14 … 20 mm
10 kN; 20 kN
Application
Measurement of electrode force in spot welding apparatus
Техническая спецификация de994.pdf
О компании Tecsis
Как производитель датчиков и измерительных приборов компания присутствует на рынке уже несколько десятилетий. К 1997г. она вышла на мировой рынок под эгидой бренда VDO, но уже в 2001 отделилась под собственным именем Tecsis.
Читать далее...