Tecsis — Relative Pressure: 0 ... 1 bar to 0 ... 1000 bar P1601/P1603/P1611/P1613
Наличие
Цена
Для уточнения цены нам необходимо связаться с производителем. Отправляйте запрос по почте, через корзину сайта или через форму заявки.
Ответим на Ваш запрос в течение 5 дней.
Доставка
- транспортной компанией на Ваш выбор
- самовывоз из офиса в Санкт-Петербурге
- бесплатная доставка до терминала “Деловые Линии” в Санкт-Петербурге
For controlling or regulating process sequences contact pressure gauges with electrical alarm contacts can be used. Depending on the position of the pointer on the pressure gauge the contacts open or close electrical circuits .
For process pressures of approximately 1 bar and more our contact pressure gauges with the Bourdon tube system can be used. The copper alloy materials that are used in the pressure gauges may not be attacked by the media (gases or liquids). Liquids may not be too viscous or be susceptible to crystallization. A very reliable and inexpensive contact pressure gauge is realized by the inexpensive and established Bourdon tube system coupled with a modern modular principle.
Gauges with liquid filling are damped if pressure pulses or mechanical vibrations arise. This extends the service life and the gauge display remains largely vibration free. The location of the pressure connection at the bottom or back allows different methods of installation.
Especially in harsh industrial conditions electrical alarm contacts are used as magnetic snap-action contacts. To switch high currents reliably, a high contact pressure and different electrical contact materials are chosen. A relay is to be used to provide an appropriate current rating, if the electrical switching capacities of the alarm contacts are exceeded or not reached.
Inductive alarm contacts have no unfavourable effects on the pressure measuring system while having an unlimited service life, because they operate without physical contact. These contacts always need a control unit for operation. If the appropriate regulations are observed, the contact pressure gauges with inductive alarm contacts can be used in potentially explosive atmospheres.
Features
- Connection position bottom radial or back eccentric
- Modular construction system ensures high reliability and long service life
- Liquid dampening provides vibration-free display
- Overload capacity up to 2,5 x
- Protection to IP 54
- Accuracy class 1.0 (acc. EN 837-1)
- Case, steel black
- Copper alloy measuring system
- Up to four alarm contacts possible
- Suitable for programmable controller (SPS)
ND 100
Measuring ranges:0 ... 1 bar to 0 ... 1000 bar
Applications
- Mechanical engineering and plant construction
- Water treatment
- Hydraulic and pneumatic systems
Техническая спецификация de220.pdf Инструкция по использованию be1500.pdf
О компании Tecsis
Как производитель датчиков и измерительных приборов компания присутствует на рынке уже несколько десятилетий. К 1997г. она вышла на мировой рынок под эгидой бренда VDO, но уже в 2001 отделилась под собственным именем Tecsis.
Читать далее...