Другие товары ABB

Показано товаров: 10 из 22801
Артикул: 1015392
Extended Product Type:IO/S8.6.1.1
Product ID:2CDG110169R0011
EAN:4016779881081
Catalog Description:IO/S8.6.1.1 IO-Actuator, 8fold, MDRC
Long Description:For the control of loads in residential areas, typically in hotel rooms and apartments. The I/O Actuators provide binary inputs for the connection of conventional push-buttons and outputs for switching loads. Inputs and outputs can be internally connected
Артикул: 1015393
Extended Product Type:RM/S4.1
Product ID:2CDG110170R0011
EAN:4016779881265
Catalog Description:RM/S4.1 Room Master, MDRC
Long Description:Device to control of apartment ranges, typically in hotels and small apartments. 8 inputs and 8 outputs.
Артикул: 1015394
Extended Product Type:LK/S4.2
Product ID:2CDG110171R0011
EAN:4016779881678
Catalog Description:LK/S4.2 Line Coupler
Long Description:The ABB i-bus® KNX Line Coupler LK/S 4.2 is a modular installation device with a module width of 2 space units. It is used as a line or area coupler or as a repeater. As a line coupler, the LK/S connects a line with a main line, as an area coupler it conn
Артикул: 1015395
Extended Product Type:DLR/A4.8.1.1
Product ID:2CDG110172R0011
EAN:4016779882378
Catalog Description:DLR/A4.8.1.1, DALI Light Cont, 4f, SM
Long Description:Surface mounting Device for switching and dimming of 16 independent groups of luminaries. Up to 64 DALI participants can be connected to one DALI control line. When combined with the light sensor LF/U 2.1 the device can be used as a 8-fold light controlle
Артикул: 1015396
Extended Product Type:IPR/S3.1.1
Product ID:2CDG110175R0011
EAN:4016779906487
Catalog Description:IPR/S3.1.1 IP Router
Long Description:Connects the KNX bus with the Ethernet network. The device uses the KNXnet/IP protocol for communication (Routing and Tunneling). It can be used as a fast line and area coupler. The full filter table for main groups 0-31 is supported. KNX devices can be p
Артикул: 1015397
Extended Product Type:IPS/S3.1.1
Product ID:2CDG110177R0011
EAN:4016779906517
Catalog Description:IPS/S3.1.1 IP Schnittstelle
Long Description:Connects the KNX bus with the Ethernet network. The device uses the KNXnet/IP protocol for communication (Tunneling). KNX devices can be programmed via the LAN using ETS. For this and further clients 5 Tunneling Server are available. The IP address can be
Артикул: 1015398
Extended Product Type:MG/E4.4.1
Product ID:2CDG110178R0011
EAN:4016779925495
Catalog Description:MG/E 4.4.1 Zone Module, 4-fold
Long Description:to connect to Security Panel GM/A 8.1 via the Security-Bus. For expansion of the Security-Panel by 4 detector zones. Used for connection to the exterior perimeter detectors such as magnetic reed contacts and passive glass break sensors. The module has 4 z
Артикул: 1015399
Extended Product Type:SA/S2.6.2.1
Product ID:2CDG110180R0011
EAN:4016779925068
Catalog Description:SA/S2.6.2.1, Switch Act, 2f, 6A, Man.
Long Description:Uses potential free contacts to switch 2 independent electrical loads via the ABB i-bus®. Manual operation and display of the switching state of the contacts. The 6A-AC3 device is especially suited to switch resistive, inductive or capacitive loads.
Артикул: 1015400
Extended Product Type:SA/S4.6.2.1
Product ID:2CDG110181R0011
EAN:4016779925099
Catalog Description:SA/S4.6.2.1, Switch Act, 4f, 6A, Man.
Long Description:Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus®. Manual operation and display of the switching state of the contacts. The 6A-AC3 device is especially suited to switch resistive, inductive or capacitive loads.
Артикул: 1015401
Extended Product Type:SA/S8.6.2.1
Product ID:2CDG110182R0011
EAN:4016779925136
Catalog Description:SA/S8.6.2.1, Switch Act, 8f, 6A, Man.
Long Description:Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus®. Manual operation and display of the switching state of the contacts. The 6A-AC3 device is especially suited to switch resistive, inductive or capacitive loads.