KO 4300 DOLD
Показано товаров: 4 из 24
Артикул: 1325508
• Width 22,5 / 45 / 67,5 / 90 mm
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
Артикул: 1325507
• Width 22,5 / 45 / 67,5 / 90 mm
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
Артикул: 1325506
• Width 22,5 / 45 / 67,5 / 90 mm
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
Артикул: 1325505
• Width 22,5 / 45 / 67,5 / 90 mm
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
Ответ от производителя может занять до 5 дней и более.
