Safety sensors Schmersal

• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from side
• serial diagnostic output
• Max. 31 sensors can be wired in series.

• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x Pre-wired cable 8-pole
• Actuation from side
• serial diagnostic output
• Max. 31 sensors can be wired in series.

• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from side
• with edge monitoring of the reset pushbutton
• To control positive-guided relay without downstream safety monitoring module
• Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
• Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to EN ISO 13849-1

• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from side
• without edge monitoring of the enabling pushbutton, suitable for automatic start
• To control positive-guided relay without downstream safety monitoring module
• Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
• Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to EN ISO 13849-1

• Thermoplastic enclosure
• Pre-wired cable 4-pole
• Electronic contact-free, coded system
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs

• Pre-wired cable 5-pole
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Comfortable diagnostics through sensor LED and electronic signalling output
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs

• Connector M12, 4-pole
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs

• Thermoplastic enclosure
• Connector M12, 5-pole
• Electronic contact-free, coded system
• Comfortable diagnostics through sensor LED and electronic signalling output
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs

• 2 x Connector M12, 4-pole
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs

• 2 x Pre-wired cable 4-pole
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs