Fail-safe standstill monitors Schmersal
Показано товаров: 10 из 21
Артикул: 282770
• Detects standstill using 2 impulse sensor(s)
• 2 safety contacts
• 2 Signalling outputs
• 2 safety contacts
• 2 Signalling outputs
Артикул: 282769
• Detects standstill using 2 impulse sensor(s)
• 2 safety contacts
• 2 Signalling outputs
• 2 safety contacts
• 2 Signalling outputs
Артикул: 282768
• Detects standstill using 2 impulse sensor(s)
• 2 safety contacts
• 2 Signalling outputs
• 2 safety contacts
• 2 Signalling outputs
Артикул: 282767
• Fail-safe standstill monitors
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• Control category 4 to EN ISO 13849-1
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• Control category 4 to EN ISO 13849-1
Артикул: 282766
• Fail-safe standstill monitors
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• Control category 4 to EN ISO 13849-1
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• Control category 4 to EN ISO 13849-1
Артикул: 282765
• Fail-safe standstill monitors
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
Артикул: 282764
• Fail-safe standstill monitors
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
Артикул: 282763
• Fail-safe standstill monitors
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
Артикул: 282762
• Fail-safe standstill monitors
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
Артикул: 282761
• Fail-safe standstill monitors
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
Ответ от производителя может занять до 5 дней и более.
