Sine-wave filters Siemens

Обзор



If a sine-wave filter is connected to the output of the Power Module or Motor Module, the voltage between the motor terminals is virtually sinusoidal. This reduces the voltage load on the motor windings and prevents motor noise induced by the pulse frequency.

The pulse frequency of the modules must be set to 4 kHz for the sine-wave filters. The max. output frequency with sine-wave filter is limited to 150 Hz.

As a result, the max. possible output current and the max. achievable output voltage of the units are reduced. The voltage drops across the sine-wave filter, a factor which must also be taken into account in the drive design.

A sine-wave filter must be installed as close as possible to the Motor Module or Power Module.

It is only permissible to operate the sine-wave filter when the motor is connected (sine-wave filters are not no-load proof)!

For additional information on sine-wave filters, please refer to the SINAMICS Low Voltage Engineering Manual.

Технические данные



Line voltage 380 … 480 V 3 AC

Sine-wave filter

 

6SL3000-2CE32-3AA0

6SL3000-2CE32-8AA0

6SL3000-2CE33-3AA0

6SL3000-2CE34-1AA0

Rated current

A

225

276

333

408

Power loss, max.

     
  • At 50 Hz 400 V

kW

0.221

0.235

0.245

0.34

  • At 60 Hz 460 V

kW

0.265

0.282

0.294

0.408

  • At 150 Hz 400 V

kW

0.48

0.5

0.53

0.75

Load connection

 

Flat connector for M10 screw

Flat connector for M10 screw

Flat connector for M10 screw

Flat connector for M10 screw

PE connection

 

1 × hole M10

1 × hole M10

1 × hole M10

1 × hole M10

Cable length, max.

between sine-wave filter and motor

     
  • Shielded

m

300

300

300

300

  • Unshielded

m

450

450

450

450

Degree of protection

 

IP00

IP00

IP00

IP00

Dimensions

     
  • Width

mm

620

620

620

620

  • Height

mm

300

300

370

370

  • Depth

mm

320

320

360

360

Weight, approx.

kg

124

127

136

198

Conformity

 

CE

CE

CE

CE

Approvals, according to

 

cURus

cURus

cURus

cURus

Suitable for Power Module

 

6SL3310-1TE32-1AA3

6SL3315-1TE32-1AA3

6SL3310-1TE32-6AA3

6SL3315-1TE32-6AA3

6SL3310-1TE33-1AA3

6SL3315-1TE33-1AA3

6SL3310-1TE33-8AA3

6SL3310-1TE35-0AA3

6SL3315-1TE35-0AA3

Suitable for Motor Module

 

6SL3320-1TE32-1AA3

6SL3325-1TE32-1AA3

6SL3320-1TE32-6AA3

6SL3325-1TE32-6AA3

6SL3320-1TE33-1AA3

6SL3325-1TE33-1AA3

6SL3320-1TE33-8AA3

6SL3320-1TE35-0AA3

6SL3325-1TE35-0AA3

  • Rated current of the Motor Module or Power Module at a pulse frequency of 4 kHz

A

170

215

270

330

380

  • Type rating of the Motor Module or Power Module at a pulse frequency of 4 kHz

kW

90

110

132

160

200