DME20 DRIVE-CLiQ Hub Module Siemens

Обзор



The DME20 DRIVE-CLiQ Hub Module is used to implement a star-shaped topology of a DRIVE-CLiQ line. Two DME20 DRIVECLiQ Hub Modules can be connected in series (cascaded).

Дизайн



The DME20 DRIVE-CLiQ Hub Module in degree of protection IP67 is suitable for installation outside the control cabinets.

The following are located on the DME20 DRIVE-CLiQ Hub Module:

  • 6 DRIVE-CLiQ sockets for connecting 5 DRIVE-CLiQ devices
  • 1 connection for the electronics power supply via the 24 V DC round supply connector with conductor cross-section 4 × 0.75 mm2 (pins 1+2 internally jumpered; pins 3+4 internally jumpered)

The scope of supply of the DME20 DRIVE-CLiQ Hub Modules includes:

  • 6 blanking plugs for closing unused DRIVE-CLiQ sockets

Интеграция



Signals from more than one encoder can be collected with the DRIVE-CLiQ Hub Module and forwarded to the Control Unit through a single DRIVE-CLiQ cable.

With a DRIVE-CLiQ Hub Module, individual DRIVE-CLiQ nodes can be removed without interrupting the data exchange with the remaining devices in the DRIVE-CLiQ line.

Технические данные



DME20 DRIVE-CLiQ Hub Module

6SL3055-0AA00-6AB0

 

Current demand, max.

At 24 V DC without DRIVE-CLiQ supply

0.15 A

  • Conductor cross-section, max.

4 × 0.75 mm2

Degree of protection

IP67

Dimensions

 
  • Width

99 mm

  • Height

149 mm

  • Depth

55.7 mm (without connector)

Weight, approx.

0.8 kg

Conformity

CE

Approvals, according to

cULus