SMC10 Sensor Module Cabinet-Mounted Siemens

Обзор



The SMC10 Sensor Module Cabinet-Mounted is required to evaluate the encoder signals of motors without a DRIVE-CLiQ interface. External encoders can also be connected via the SMC10.

The following encoder signals can be evaluated:

  • 2-pole resolver
  • Multipole resolver

Дизайн



The SMC10 Sensor Module Cabinet-Mounted features the following interfaces as standard:

  • 1 DRIVE-CLiQ interface
  • 1 encoder connection including motor temperature detection (KTY84-130 or PTC) via SUB-D connector
  • 1 connection for the electronics power supply via the 24 V DC supply connector
  • 1 PE/protective conductor connection

The status of the SMC10 Sensor Module Cabinet-Mounted is indicated via a multi-color LED.

The SMC10 Sensor Module Cabinet-Mounted can be snapped onto a TH 35 top-hat rail according to EN 60715 (IEC 60715).

The signal cable shield is connected via the encoder system connector and can also be connected to the SMC10 Sensor Module Cabinet-Mounted via a shield connection terminal, e.g. Phoenix Contact type SK8 or Weidmüller type KLBÜ CO 1.

Интеграция



SMC10 Sensor Modules Cabinet-Mounted communicate with a Control Unit via DRIVE-CLiQ.

Технические данные



SMC10 Sensor Module Cabinet-Mounted

6SL3055-0AA00-5AA3

 

Current demand, max.

At 24 V DC,
without taking encoder into account

0.2 A

  • Conductor cross-section, max.

2.5 mm2

  • Fuse protection, max.

20 A

Power loss, max.

10 W

Encoders which can be evaluated

  • 2-pole resolver
  • Multipole resolver
  • Excitation voltage, rms

4.1 V

  • Excitation frequency

5 ... 10 kHz depending on the current controller clock cycle of the Motor Module or Power Module

  • Transformation ratio

0.5

  • Encoder frequency, max.

2 kHz (120000 rpm) depending on the pole pair number of the resolver and the current controller clock cycle of the Motor Module or Power Module

  • Signal subdivision (interpolation), max.

16384 times (14 bit)

  • Cable length to encoder, max.

130 m

PE connection

M4 screw

Dimensions

 
  • Width

30 mm

  • Height

150 mm

  • Depth

111 mm

Weight, approx.

0.4 kg

Conformity

CE

Approvals, according to

cULus