SMC20 Sensor Module Cabinet-Mounted Siemens

Обзор

The SMC20 Sensor Module Cabinet-Mounted is required to evaluate the encoder signals of motors without a DRIVE-CLiQ interface. External encoders can also be connected via the SMC20.

The following encoder signals can be evaluated:

• Incremental encoder sin/cos 1 V_pp
• EnDat absolute encoder
• SSI encoder with incremental signals sin/cos 1 V_pp (firmware version 2.4 and later)

The motor temperature can also be detected with KTY84-130 or PTC thermistors.

Дизайн

The SMC20 Sensor Module Cabinet-Mounted features the following interfaces as standard:

• 1 DRIVE-CLiQ interface
• 1 encoder connection including motor temperature detection (KTY84-130 or PTC) via SUB-D connector
• 1 connection for the electronics power supply via the 24 V DC supply connector
• 1 PE/protective conductor connection

The status of the SMC20 Sensor Module Cabinet-Mounted is indicated via a multi-color LED

The SMC20 Sensor Module Cabinet-Mounted can be snapped onto a TH 35 top-hat rail acc. to EN 60715 (IEC 60715).

The signal cable shield is connected via the encoder system connector and can also be connected to the SMC20 Sensor Module Cabinet-Mounted via a shield connection terminal, e.g. Phoenix Contact type SK8 or Weidmüller type KLBÜ CO 1.

Интеграция

SMC20 Sensor Modules Cabinet-Mounted communicate with a Control Unit via DRIVE-CLiQ.

Технические данные