SIPLUS PS 24V/0.5A и 24V/0.375A Siemens

Input

Input

DC voltage

Supply voltage

• ● for DC

48 ... 220 V

Voltage range AC

30 ... 187 V

Input voltage

• ● for DC

30 ... 264 V

Wide-range input

Yes

Overvoltage resistance

-

Mains buffering at Iout rated, min.

10 ms; at Vin = 220 V

Input current

• ● at rated input voltage 48 V

0.3 A

• ● at rated input voltage 220 V

0.06 A

Switch-on current limiting (+25 °C), max.

35 A

Duration of inrush current limiting at 25 °C

• ● typical

3 ms

I²t, max.

1.2 A²·s

Built-in incoming fuse

F 4 A/250 V (not accessible)

Protection in the mains power input (IEC 898)

Recommended miniature circuit breaker: from 6 A characteristic C, suitable for DC

Output

Output

Controlled, isolated DC voltage

Rated voltage Vout DC

24 V

Total tolerance, static ±

3 %

Static mains compensation, approx.

0.1 %

Static load balancing, approx.

0.1 %

Residual ripple peak-peak, max.

150 mV

Residual ripple peak-peak, typ.

50 mV

Spikes peak-peak, max. (bandwidth: 20 MHz)

240 mV

Spikes peak-peak, typ. (bandwidth: 20 MHz)

50 mV

Product function Output voltage adjustable

No

Output voltage setting

-

Status display

Green LED for 24 V OK

On/off behavior

No overshoot of Vout (soft start)

Startup delay, max.

2.5 s

Voltage rise, typ.

90 ms

Rated current value Iout rated

0.375 A

Current range

0 ... 0.375 A

• ● Note

+60 ... +70 °C: Derating 3%/K

Active power supplied typical

9 W

Short-term overload current

• ● at short-circuit during operation typical

2.7 A

Duration of overloading capability for excess current

• ● at short-circuit during operation

200 ms

Parallel switching for enhanced performance

No

Efficiency

Efficiency at Vout rated, Iout rated, approx.

66 %

Power loss at Vout rated, Iout rated, approx.

4.6 W

Closed-loop control

Dynamic mains compensation (Vin rated ±15 %), max.

0.3 %

Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.

0.4 %

Load step setting time 50 to 100%, typ.

2 ms

Load step setting time 100 to 50%, typ.

2 ms

Protection and monitoring

Output overvoltage protection

Yes, according to EN 60950-1

Current limitation

0.41 ... 0.49 A

Property of the output Short-circuit proof

Yes

Short-circuit protection

Electronic shutdown, automatic restart

Enduring short circuit current RMS value

• ● maximum

0.9 A

Overload/short-circuit indicator

-

Safety

Primary/secondary isolation

Yes

Galvanic isolation

Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178

Protection class

Class I

Leakage current

• ● maximum

3.5 mA

CE mark

Yes

UL/CSA approval

Yes

UL/cUL (CSA) approval

cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289, cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File E151273

Explosion protection

-

Certificate of suitability IECEx

No

Certificate of suitability NEC Class 2

No

FM approval

-

CB approval

No

Marine approval

-

Degree of protection (EN 60529)

IP20

EMC

Emitted interference

EN 55022 Class B

Supply harmonics limitation

not applicable

Noise immunity

EN 61000-6-2

Operating data

Ambient temperature

• ● during operation

-25 ... +70 °C

• — Note

with natural convection

• ● during transport

-40 ... +70 °C

• ● during storage

-40 ... +70 °C

Humidity class according to EN 60721

Climate class 3K3, no condensation

Mechanics

Connection technology

screw-type terminals

Connections

• ● Supply input

L+1, M1, PE: 1 screw terminal each for 0.5 ... 2.5 mm² single-core/finely stranded

• ● Output

+: 1 screw terminal for 0.5 ... 2.5 mm²; -: 2 screw terminals for 0.5 ... 2.5 mm²

• ● Auxiliary

-

Width of the enclosure

22.5 mm

Height of the enclosure

80 mm

Depth of the enclosure

91 mm

Weight, approx.

0.14 kg

Product property of the enclosure housing for side-by-side mounting

Yes

Installation

Snaps onto DIN rail EN 60715 35x7.5/15

Other information

Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)