SIDOOR ATD400V elevator door drive Siemens

Область применения

The SIDOOR ATD400V Elevator Door Drive for rising doors and rolling shutters is an intelligent door control system that enables the operation of vertical door systems on elevators at adjustable speeds and accelerations.

The maintenance-free, variable speed drive unit comprises a DC motor with non-self-locking gearing. The SIDOOR M4 geared motor (30 V DC/4.0 A; motor for max. dynamic door weight of 400 kg) must be ordered separately → see"Geared motors".

Operation of the door drive does not require a limit switch. The door width and the "OPEN"/"CLOSE" positions are determined automatically.

The current operating states are indicated by a 7‑segment display directly in the SIDOOR ATD400V Elevator Door Drive. They can also be displayed externally with the aid of the Software Kit or Service Tool → see "Additional units".

Power transmission is via a toothed belt, which passes over a deflector unit and can be fitted with two door clutch holders. These accessories are not included in the scope of delivery → see "Accessories".

Обзор

SIDOOR ATD400V Elevator Door Drive

SIDOOR ATD400V – the SIDOOR ATD400V Elevator Door Drive enables the quick, easy and versatile installation, configuration and operation of vertical elevator door systems, such as rising doors and roller shutters.

• Relay module design
• For dynamic door weights up to 400 kg
• Automatic door weight detection
• Operating temperature -20 to +50 °C
• Opening width 0.3 to 4 m
• Emergency power input via special emergency power module 24 V DC ± 15 %
• Auxiliary power output 24 V DC ± 15 %; 0.4 A (short-circuit-proof)
• Output stage short-circuit-proof
• Vandal-proof
• Degree of protection:
  • motor IP54
  • gear unit IP40

Дизайн

The SIDOOR ATD400V Elevator Door Drive system consists of a number of components:

Конфигурация

During initial commissioning, please note the following:

• For mechanical installation and configuration, see the "SIDOOR Door Control Systems AT40, ATD400K, ATD400S, ATD400V, ATD400W" manual.http://support.automation.siemens.com/WW/view/en/58531074
• Electrical configuration and commissioning:
  
  
  • Push the door into the "CLOSED" position.
  • Open the device cover
  • Plug in the motor connector
  • Connect NT40 switch mode power supply to 230 V AC mains supply
  • Press and hold the learn run button
  • Connect the NT40 switch mode power supply output to the input of the SIDOOR ATD400V Elevator Door Drive
  • The learn run starts automatically and the learn run button can be released.
  • On completion of the learn run, the door is in the "CLOSED" position and the 7-segment display indicates "u".
  • The door can now be moved via the "OPEN" and "CLOSE" buttons with the default profile.

Особенности

• 1-button operation for the entire commissioning process
• Optimum and stable drive characteristics
• Reduced service requirements and costs
• SIDOOR User Software (part of the Software Kit, not included in the scope of delivery, see "Additional units") enables user-friendly operation and detailed diagnostics.
• Integrated terminal module enables simple setup and diagnostics via an event and statistics memory
• Integrated relay module for the "OPEN" position, "CLOSED" position and "Reversing" functions.
• Small footprint thanks to compact design
• Automated functions for enhanced safety

Програмирование

The Software Kit is available as an additional unit (see "Additional units") and allows quick and easy updating of the firmware using the Siemens HCS12 Firmware Loader.

User-friendly parameter setting and oscilloscope function is carried out via the SIDOOR User Software (part of the Software Kit).

Технические данные

Дальнейшая информация

For further product details, refer to the

• "SIDOOR Door Control Systems AT40, ATD400K, ATD400S, ATD400V, ATD400W" Manual, http://support.automation.siemens.com/WW/view/en/58531074
• "SIDOOR Software Kit" Installation Instructions, http://support.automation.siemens.com/WW/view/en/58572351