IFN ANALOG INPUT Siemens

Область применения



The IFN ANALOGINPUT is a robust interface node for SIPLUS CMS4000, designed for detecting voltages (-10 V to +10 V) in the frequency range from 0 Hz to 40 kHz.

The IFN ANALOGINPUT is used for high-accuracy, continuous monitoring in harsh environments.

Обзор



The IFN ANALOGINPUT is a robust interface node for SIPLUS CSM4000:

  • Provision of measured data for further processing in combination with the SIPLUS CMS X‑Tools software (this analysis software must be ordered separately, see "Analysis Software" → "SIPLUS CMS X‑Tools")
  • For recording DC and AC voltages (-10 V to +10 V) in the frequency range from 0 Hz to 40 kHz
  • Can be used for high-accuracy, continuous monitoring in harsh environments

Дизайн



The fronts of the IFN AI and IFN AI-D feature:

  • LEDs for status display
  • Six connections for analog inputs (-10 V to +10 V, -20 V to +20 V)
  • Three connections for IEEE1394 bus system
  • One connection for power supply

Connection to the higher-level evaluation PC is via an IEEE1394 bus system operating at 400 Mbit/s.

The module can be mounted on an IEC rail or with mounting brackets.

Функции



The IFN ANALOGINPUT enables up to six analog signals (-10 V to +10 V) to be recorded.

The maximum sampling frequency is 192 kHz per channel.

Чертеж



IFN ANALOGINPUT

Особенности


  • Thanks to the rugged design and IP67 degree of protection, the IFN ANALOGINPUT is suitable for use in rough industrial environments.
  • The compact design permits applications in confined areas.
  • Easy handling facilitates efficient commissioning and maintenance.

Технические данные


 

IFN ANALOGINPUT (IFN AI)

IFN ANALOGINPUT-DISTANCE (IFN AI-D)

Communication (LNK0 … LNK2)

 

Quantity

3

Connector

Female connector 8-pin (M12)

Protocol

IEEE1394a / b

Data rate

400 Mbit/s

Galvanic isolation

no

Power supply (PWR)

 

Connector

Male connector 5-pin (M12)

DC input voltage

18 … 32 V

DC overvoltage protection

Max. 35 V

DC current consumption

Typ. 0.2 A at 24 V DC

Reverse-polarity protection

yes

Power supply

Stabilized

DC power consumption

Typ. 4.3 W

Electrical isolation

no

Measuring inputs (CH1 … CH6)

 

Quantity

6

Connector

Female connector 5-pin (M12)

Resolution

16 bits (15 + sign)

DC overvoltage protection

±60 V

Postscanning (parameterizable in SIPLUS CMS X‑Tools)

0.014 / 0.33 / 4 / 8 / 16 / 24 / 48 / 64 / 96 kHz

Crosstalk attenuation (CTA)

-90 dB at 1 kHz

Signal-to-noise ratio (SNR)

-80 dB

Scanning frequency

192 kHz

Input frequency range

0 … 40 kHz

Accuracy

±0.5 %

Galvanic isolation

no

Cable break monitoring

yes

Cable short-circuit monitoring

no

DC input voltage

-10 ... +10 V

-20 ... +20 V

Input current

-12 µA ... +12 µA

DC overvoltage protection

-60 ... +60 V

Functional grounding

 

Connection

M4 screw with contact washer

Cable cross-section

2.5 mm2

Connecting cable

 

Communications

Pre-assembled 8-pin cable (shielded)1)

Signal inputs

Pre-assembled 5-pin cable (shielded)1)

Power supply

Pre-assembled 5-pin cable (shielded)1)

Environmental conditions

 

Operating temperature

-40 ... +65 °C

Storage/transport temperature

-40 ... +85 °C

Degree of protection

IP67

Constructional design

 

Enclosure

Aluminum

Dimensions (H x W x D) incl. connector

 
  • without DIN rail and mounting bracket

210 mm x 86 mm x 87 mm

  • with DIN rail

210 mm x 86 mm x 96 mm

  • with mounting bracket

243 mm x 86 mm x 97 mm

Installation

 
  • Standard

DIN rail TH 35-15 according to IEC 60715

  • optional

Mounting bracket1)

Minimum clearances

 
  • Front

80 mm

  • Top

25 mm

  • Bottom

25 mm

Weight

Approx. 1240 g

Approvals

 

CE

Industrial environment



1) See Operating Instructions for accessories (not included in scope of delivery).

Дальнейшая информация



For further product details, refer to the