UP 258D.. - Presence detector Siemens

Обзор

Функции

UP 258D..

Presence detector

Passive infrared detector for ceiling mounting indoors

• Optional blinding of parts of the detection area
• Mixed light measurement
• Power supply over the bus line
• Integrated bus coupling unit, bus connection via bus terminal
• Ceiling mounting on a flush-mounting box with 60 mm diameter and min. 40 mm depth or in a housing for surface-mounting (to be ordered separately)
• Integrated IR decoder for S 255/11

Технические данные

Дальнейшая информация

Function for S-Mode KNX

• Lighting control configurable as fully automatic or semi-automatic
• Cyclical sending or sending on change of value of the measured brightness value (Lux)
• Presence detection for three function blocks (presence detector, motion detector, and HVAC detector)
• Two per function block selectable functions (A, B) on start of the presence detection and two per function block selectable functions (C, D) on expiration of the presence detection
• Configurable delay of 0…255 seconds between sending of function A and B respectively C and D
• Selection per function (A, B, C, D) switching On/Off, 8-bit value, 16-bit value, temperature value, brightness value, 8-bit scene control
• Per function block configurable overshoot time, in each case configurable as a fixed time, as switchable between two times via the bus, or settable to a value via the bus
• Parallel operation of several presence detectors (master-slave, master-master) without additional logic module
• Functions of the IR remote control selectable per pair of pushbuttons or per each single pushbutton of a button pair
• Per pushbutton selectable function toggle, switching on, switching off, 8-bit scene recall, 8-bit value, 16-bit value, temperature value, brightness value
• For each pair of pushbuttons selectable function switching On/Off, 2-button dimming with stop telegram, 2-button solar protection control, variable 8-bit value, 8-bit scene control
• Blocking object for IR decoder
• Test mode for easy start-up
• LED for display of detected movements in test mode
• To be configured using ETS