N 141/02 - Интерфейсный блок GE 141, шлюз KNX-DALI, 1линия DALI на 64 устройства, монтаж на DIN-рейку Siemens

Обзор

.

Функции

N 141/02

Интерфейсный блок GE 141, шлюз KNX-DALI, 1линия DALI на 64 устройства, монтаж на DIN-рейку

• For communication via KNX EIB with electronic ballasts with a DALI interface
• DALI output acc. to IEC 60929, for communication with up to 64 DALI ballasts
• Integrated power supply with input voltage AC/DC 110...240 V, 50...400 Hz, for powering the gateway electronics and DALI output
• Maximum DALI output voltage of 16 V, short circuit resistant
• Green LED for displaying the operating voltage
• Pushbutton for switching between bus and direct operating mode
• Yellow LED for displaying direct mode
• One pair of push buttons for switching On/Off of all connected DALI ballasts
• One red LED in the switching button for displaying the switching state of all DALI ballasts (permanent LED light) and displaying a DALI fault condition by blinking
• Control (switching, dimming, and setting dimming value) as well as feedback of status and lamp failure of up to 64 DALI ballasts
• Operation of each DALI ballast either as individual device or as member of one of up to 16 DALI groups
• Configurable assignment of the DALI ballasts to up to 16 DALI groups, which can only be switched and dimmed in groups including reporting status and lamp failures in groups
• Control (switching, dimming, setting dimming value) of self-contained emergency luminaires as individual luminaires or as member of a DALI group
• Distinction between self-contained emergency luminaires with one or two DALI devices
• Starting the self-conducted testing of each individual inverter and reporting the test result via bus
• Distinction between function test, short duration test, and long duration test
• Optional configuration of any DALI ballast to dim to a preset dimming value in case of emergency mode
• Locking of switching and dimming commands as well as configuration while emergency mode is activated
• Activation of emergency mode based on a configurable number of failed DALI ballasts
• Transformation of dimming commands into a temporary set point adjustment for ballasts with integrated constant light level control and directly connected light level sensor
• One or two level timer
• Integrated scene control for up to 16 scenes
• Integrated one time or cyclical control of repeatable sequences or color effects
• Possible assignment of a CIN to a DALI ballast and with commissioning of DALI ballasts and test of channel, scene, and effect functionality within ETS
• Integrated bus coupling unit
• Only half a standard bus load
• Bus connection via bus terminal or contact system to data rail
• For mounting on DIN rail EN 60715-TH35-7.5

Технические данные

Дальнейшая информация

Дополнительная информация:
The data rail must be ordered separately. See chapter System Products and Accessories - data rails.