Signal cables Siemens
- For SINUMERIK 828D BASIC
- For SINUMERIK 828D
- For SINUMERIK PP 72/48D PN I/O module
- For SINAMICS S120 Combi Power Module
- For SINAMICS S120 Motor Module in booksize format
Область применения
DRIVE‑CLiQ signal cables
DRIVE-CLiQ signal cables are used to connect components with DRIVE-CLiQ connections which have a separate or external 24 V DC power supply.
MOTION‑CONNECT DRIVE‑CLiQ signal cables
MOTION‑CONNECT DRIVE‑CLiQ signal cables with 24 V DC cores are used whenever components with DRIVE-CLiQ connections must meet high requirements such as mechanical stress and oil resistance, e.g. where a connection is made outside the cabinet between Power Modules/Motor Modules and SIMOTICS S-1FK7/SIMOTICS M-1PH8 motors with DRIVE-CLiQ interface.
MOTION-CONNECT pre-assembled signal cables
MOTION-CONNECT pre-assembled signal cables are used whenever motor encoders on motors without DRIVE-CLiQ interface are connected to Sensor Modules.
Обзор
MOTION‑CONNECT DRIVE‑CLiQ signal cable with IP20/IP67 connector
Signal cables are pre-assembled and are sold by the meter for the connection of a variety of components.
The following different types of cable are available:
- DRIVE‑CLiQ signal cables
- MOTION‑CONNECT DRIVE‑CLiQ signal cables
- MOTION‑CONNECT pre-assembled signal cables
Конфигурация
Pre-assembled DRIVE-CLiQ signal cables without 24 V DC cores
Type | Length | Dmax | Degree of protection | DRIVE-CLiQ signal cable |
|---|---|---|---|---|
m (ft) | mm (in) | Article No. | ||
Fixed lengths  | 0.11 (0.36) | IP20/IP20 | 6SL3060‑4AB00‑0AA0 | |
0.16 (0.52) | 6SL3060‑4AD00‑0AA0 | |||
0.21 (0.69) | 6SL3060‑4AF00‑0AA0 | |||
0.26 (0.85) | 6SL3060‑4AH00‑0AA0 | |||
0.31 (1.02) | 6SL3060‑4AK00‑0AA0 | |||
0.36 (1.18) | 6SL3060‑4AM00‑0AA0 | |||
0.41 (1.35) | 6SL3060‑4AP00‑0AA0 | |||
0.60 (1.97) | 6SL3060‑4AU00‑0AA0 | |||
0.95 (3.12) | 6SL3060‑4AA10‑0AA0 | |||
1.20 (3.94) | 6SL3060‑4AW00‑0AA0 | |||
1.45 (4.76) | 6SL3060‑4AF10‑0AA0 | |||
2.80 (9.19) | 6SL3060‑4AJ20‑0AA0 | |||
5.00 (16.4) | 6SL3060‑4AA50‑0AA0 | |||
To the decimeter  | max. 70 (230) | 7.0 | IP20/IP20 | 6FX2002‑1DC00‑.... |
Length code | .... | |||
Pre-assembled MOTION-CONNECT DRIVE-CLiQ signal cables with 24 V DC cores
Type | Usage | Length, max. | Dmax | Degree of protection | MOTION-CONNECT |
|---|---|---|---|---|---|
m (ft) | mm (in) | Article No. | |||
To the decimeter  | For built-in or built-on encoder systems with DRIVE-CLiQ. For example, for making the connection between SIMOTICS motors and SINAMICS S120 Motor Modules or Power Modules. | 75 (246) | 7.1 (0.28) | IP20/IP67 | 6FX8002‑2DC10‑.... |
100 (328) | 7.1 (0.28) | IP20/IP67 | 6FX5002‑2DC10‑.... | ||
MOTION‑CONNECT 500 | 5 | ||||
MOTION‑CONNECT 800PLUS | 8 | ||||
Length code | .... | ||||
Pre-assembled signal cables for direct or external measuring systems with full-thread connector
Encoder system | Connection via | Length, max. | Dmax | Degree of protection | Basic cable | Extension |
|---|---|---|---|---|---|---|
| m (ft) | mm (in) | Article No. | Article No. | ||
Absolute encoder with EnDat | SMC20 | 100 (328) | 9.8 (0.39) | IP20/IP67 | 6FX❑002‑2EQ10‑.... | 6FX❑002‑2EQ14‑.... |
Absolute encoder with EnDat | SMC20 | 100 (328) | 9.2 (0.36) | IP20/IP67 | 6FX❑002‑2CH00‑.... | 6FX❑002‑2AD04‑.... |
Absolute encoder with SSI | SMC30 | 100 (328) | 9.3 (0.37) | IP20/IP67 | 6FX❑002‑2CC11‑.... | 6FX❑002‑2CB54‑.... |
Incremental encoder sin/cos 1 Vpp | SMC20 | 100 (328) | 9.8 (0.39) | IP20/IP67 | 6FX❑002‑2CA31‑.... | 6FX❑002‑2CA34‑.... |
Incremental encoder sin/cos 1 Vpp | SMC20 | 50 (164) | 9.2 (0.36) | IP20/IP67 | 6FX8002‑2CA80‑.... | 6FX❑002‑2CA34‑.... |
HTL incremental encoder | SMC30 | 3002) | 9.3 (0.37) | IP20/IP67 | 6FX❑002‑2AH00‑.... | 6FX❑002‑2AH04‑.... |
Incremental encoder sin/cos 1 Vpp without C and D tracks | SMC20 | 50 (164) | 9.3 (0.37) | IP20/IP67 | 6FX❑002‑2CG00‑.... | 6FX❑002‑2CB54‑.... |
HTL incremental encoder | SMC30 | 100 (328) | 9.3 (0.37) | –/IP67 | 6FX5002‑2CA12‑.... | – |
TTL incremental encoder RS422 | ||||||
| SMC30 | 100 (328) | 9.3 (0.37) | IP20/IP67 | 6FX❑002‑2CR00‑.... | 6FX❑002‑2CB54‑.... |
| SMC30 | 100 (328) | 9.3 (0.37) | IP20/IP67 | 6FX❑002‑2CD24‑.... | 6FX❑002‑2CB54‑.... |
MOTION‑CONNECT 500 | 5 | 5 | ||||
MOTION‑CONNECT 800PLUS | 8 | 8 | ||||
Length code | .... | .... | ||||
1) The specification of the degree of protection refers to the basic cable.
2) Applicable to HTL encoders with bipolar signal evaluation or for evaluation of the difference signals A*, A and B*, B; for HTL encoders with unipolar signal evaluation, the permissible cable length is reduced to 100 m.
The combinations of signal cable extensions shown are only provided by way of example.
The maximum specified cable length (basic cable and extensions) must not be exceeded. The total maximum length is reduced by 2 m (6.56 ft) for each interruption point.
Технические данные
DRIVE‑CLiQ signal cables | DRIVE‑CLiQ | DRIVE‑CLiQ MOTION‑CONNECT 500 | DRIVE‑CLiQ MOTION‑CONNECT 800PLUS |
|---|---|---|---|
| 6FX2...‑1DC..‑.... | 6FX5...‑.DC..‑.... | 6FX8...‑.DC..‑.... |
Approvals, according to | |||
| UL STYLE 2502/CSA-N.210.2-M90 | UL STYLE 2502/CSA-N.210.2-M90 | UL STYLE 20236/CSA-N.210.2-M90 |
| Yes | Yes | Yes |
| Yes | Yes | Yes |
Rated voltage according to EN 50395 | 30 V | 30 V | 30 V |
Test voltage, rms | 500 V | 500 V | 500 V |
Operating temperature on the surface | |||
| ‑20 … +80 °C (‑4 ... +176 °F) | ‑20 … +80 °C (‑4 ... +176 °F) | ‑20 … +80 °C (‑58 ... +176 °F) |
| – | 0 … 60 °C (+32 ... +140 °F) | ‑20 … +60 °C (‑4 ... +140 °F) |
Tensile stress, max. | |||
| 45 N/mm2 (6526 lbf/in2) | 80 N/mm2 (11603 lbf/in2) | 50 N/mm2 (7252 lbf/in2) |
| – | 30 N/mm2 (4351 lbf/in2) | 20 N/mm2 (2901 lbf/in2) |
Smallest bending radius | |||
| 50 mm (1.97 in) | 35 mm (1.38 in) | 35 mm (1.38 in) |
| – | 125 mm (4.92 in) | 75 mm (2.95 in) |
Torsional stress | – | Absolute 30°/m | Absolute 30°/m |
Bending | – | 100000 | 10 million |
Traversing velocity | – | 30 m/min (98.4 ft/min) | 300 m/min (984 ft/min) |
Acceleration | – | 2 m/s2 (6.56 ft/s2) | Up to 50 m/s2 (164 ft/s2) |
Insulation material, | CFC/silicone-free | CFC/silicone-free | CFC/halogen/silicone-free |
Oil resistance | EN 60811‑2‑1 | EN 60811‑2‑1 | EN 60811‑2‑1 |
Outer jacket | PVC | PVC | PUR, HD22.10 S2 (VDE 0282, Part 10) |
Gray RAL 7032 | DESINA color green RAL 6018 | DESINA color green RAL 6018 | |
Flame-retardant | EN 60332‑1‑1 to 1‑3 | EN 60332‑1‑1 to 1‑3 | EN 60332‑1‑1 to 1‑3 |
1) The File No. is printed on the cable jacket.
Degree of protection of pre-assembled signal cables and their extensions when closed and connected: IP67.
Signal cables | MOTION‑CONNECT 500 | MOTION‑CONNECT 800PLUS |
|---|---|---|
| 6FX500.‑....‑.... | 6FX800.‑.....‑.... |
Approvals, according to | ||
| UL758-CSA-C22.2-N.210.2-M90 | UL758-CSA-C22.2-N.210.2-M90 |
| Yes | Yes |
| Yes | Yes |
Rated voltage according to EN 50395 | 30 V | 30 V |
Test voltage, rms | 500 V | 500 V |
Operating temperature on the surface | ||
| -20 … +80 °C (‑4 ... +176 °F) | -50 … +80 °C (‑58 ... +176 °F) |
| 0 … 60 °C (+32 ... +140 °F) | -20 … +60 °C (‑4 ... +140 °F) |
Tensile stress, max. | ||
| 50 N/mm2 (7252 lbf/in2) | 50 N/mm2 (7252 lbf/in2) |
| 20 N/mm2 (2901 lbf/in2) | 20 N/mm2 (2901 lbf/in2) |
Smallest bending radius | ||
| 60 mm (2.36 in) | 4 x Dmax |
| 100 mm (3.94 in) | 70 mm (2.76 in) |
Torsional stress | Absolute 30°/m | Absolute 30°/m |
Bending | 2 million | 10 million |
Traversing velocity | 180 m/min (591 ft/min) | Up to 300 m/min (984 ft/min) |
Acceleration | 5 m/s2 (16.41 ft/s2) | Up to 50 m/s2 (164 ft/s2) |
Insulation material, incl. jacket | CFC/silicone-free | CFC/halogen/silicone-free |
Oil resistance | EN 60811‑2‑1 (mineral oil only) | EN 60811‑2‑1 |
Outer jacket | PVC | PUR, HD22.10 S2 (VDE 0282, Part 10) |
DESINA color green RAL 6018 | DESINA color green RAL 6018 | |
Flame-retardant | EN 60332‑1‑1 to 1‑3 | EN 60332‑1‑1 to 1‑3 |
1) The File No. is printed on the cable jacket.
Degree of protection of pre-assembled signal cables and their extensions when closed and connected: IP67.
Ответ от производителя может занять до 5 дней и более.
