SINUMERIK OP 08T Siemens

Обзор

The extremely compact SINUMERIK OP 08T operator panel front supports the distributed installation of the operator panel front and CNC. The SINUMERIK OP 08T operator panel front contains a membrane keyboard with 75 keys (layout as SINUMERIK KB 310C full CNC keyboard), as well as 2 × (8 + 2) horizontal and 2 × 8 vertical softkeys.

The operator panel front is mounted from the rear using special clamps included in the scope of supply.

Дизайн

The SINUMERIK OP 08T operator panel front is connected to the PCU/NCU via Ethernet as a Thin Client in its own subnet (via DHCP server to PCU/NCU).

Ports:

• 2 x USB 1.1
• Ethernet 10/100 Mbit/s

Функции

• Signal transmission between operator panel front and PCU/NCU via Industrial Ethernet
• Simple installation
• Mixed operation with one operator panel front directly at the PCU is possible. Operation on an SINUMERIK OP 08T has the same authorization rights as operation on an operator panel front connected directly to the PCU. The operator panel in passive mode shows a darkened screen.
• The distance to the operator panel fronts is determined by the maximum distance between two network nodes/access points (100 m/328 ft).

Интеграция

The SINUMERIK OP 08T Operator Panel Front can be used for:

• SINUMERIK 840D sl:
  NCU 710.3B PN/NCU 720.3B PN/NCU 730.3B PN
• SINUMERIK PCU 50.5 Windows 7

The 2 × 8 vertical softkeys can be used as direct keys with SINUMERIK 840D sl.

Особенности

• Design of compact operator panels through shallow installation depth/reduced size and low power dissipation.
• Vibration-free mounting of the SINUMERIK PCU in the control cabinet.
• Efficient operation of larger machines using up to 4 additional, distributed operator panels simultaneously.

Технические данные