Access MyMachine /P2P Siemens

Обзор



Commissioning support and remote diagnostics with SINUMERIK Operate

SINUMERIK Integrate Access MyMachine /P2P supports the commissioning of machines with SINUMERIK Operate (software version 2.6 and higher) using a standard Windows PC. Its scope of functions includes the exchange of files between the service PC and the control as well as operation of the HMI user interface. EasyScreen texts, alarm texts, tool management texts and other texts can be edited easily.

The file exchange functionality permits access from the NCU to files stored on the CF card and to files in the NCK. Various user profiles are also supported.

The file exchange only requires the Access MyMachine /P2P software, This is installed on the PC (direct access via X127 without a TS adapter does not need the option RCS Host 6FC5800-0AP30-0YB0).

If remote access, e.g. via modem, to the HMI user interface is required, the approved modem for this application is the TS Adapter IE (2 versions: analog and ISDN telecommunication networks, only via the service interface X127) (requires option Access MyMachine /P2P RCS Host 6FC5800-0AP30-0YB0).

Функции



Remote control, monitoring and administration

  • File transfer to CF card and NC file system
  • Connection is established following confirmation by the operator
  • Status display on the operator panel
  • Optional with teleservice software: (requires option Access MyMachine /P2P RCS Host 6FC5800-0AP30-0YB0)
    Machine connections can be maintained centrally and access data administered via remote connections.

File functions

Access MyMachine /P2P allows simple file management on your PC and on the SINUMERIK control systems.

  • Data transfer between SINUMERIK and PC, data transfer to CF card and NC file system
  • Generating and restoring an image from the CompactFlash card of the control system to backup data.
  • Writing existing images to a CompactFlash card.
  • Loading files directly to the control system and from the control system to the PC.

Support during commissioning

  • Managing the control system''s NC data.
  • Files can be copied directly from the PC to the NC, and from the NC to the PC.
  • Monitoring processes and remote control of the SINUMERIK via a remote control function.
  • Saving the screenshot of the HMI on the PC.

Presentation of the control system and better support in the event of a fault

  • Editing the following user files on the PC:
    • PLC alarm texts (oem_alarms_plc)
    • Cycle alarm texts (oem_alarms_cycles)
    • Part program messages (oem_partprogram_messages)
    • EasyScreen files
    • Tool management texts
    • EasyExtend files (oem_aggregate)
    • Maintenance planner files (oem_maintenance)
  • Creating and loading an archive for the control system.
  • Managing user files with the following options:
    • Creating a project OFFLINE.
    • Creating a project for which the files are automatically copied from the control system.
    • Copying individual files to the control system with the project dialog or copying from the control system to the project.
    • Deleting user files using the project dialog on the control system.

Интеграция



The components can be connected via X127 (X120/X130 have not been released)

• Point-to-point connection in combination with TS Adapter IE (analog, ISDN modem)

• Ethernet in local networks (LAN)

• Internet (VPN), taking local IT security regulations (IT Policy) into account

Особенности



Cost savings in service thanks to:

  • Less frequent service calls for the machines
  • More efficient deployment of on-site service personnel
  • Better preparation of service calls

Machine availability is enhanced thanks to:

  • Rapid online presence on site
  • Rapid file transfer to and from the machine

Дальнейшая информация



Security information

Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens'' products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates.

For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered.

For more information about industrial security, visit
http://www.siemens.com/industrialsecurity

To stay informed about product updates as they occur, sign up for a product-specific newsletter.

For more information, visit  
http://support.automation.siemens.com