DME20 DRIVE-CLiQ Hub Module Siemens

Обзор



DME20 DRIVE-CLiQ Hub Module

The DME20 DRIVE-CLiQ Hub Module is used to implement a star-shaped topology of a DRIVE‑CLiQ line. Two DME20 DRIVE‑CLiQ Hub Modules can be connected in series (cascaded).

Дизайн



The following are located on the DME20 DRIVE-CLiQ Hub Module:

  • 6 DRIVE‑CLiQ sockets for connecting 5 DRIVE-CLiQ devices
  • 1 connection for the electronics power supply via the 24 V DC circular supply connector with conductor cross-section 4 × 0.75 mm2 (pins 1+2 internally bridged; pins 3+4 internally bridged)

The scope of supply of the DME20 DRIVE‑CLiQ Hub Modules includes:

  • 6 blanking plugs for sealing unused DRIVE‑CLiQ sockets

Интеграция



Signals from more than one encoder can be collected with one DRIVE-CLiQ Hub Module and forwarded to the Control Unit through a single DRIVE-CLiQ cable.

With a DRIVE‑CLiQ Hub Module, individual DRIVE‑CLiQ devices can be removed without interrupting the data exchange with the remaining devices in the DRIVE‑CLiQ line.

The DME20 DRIVE‑CLiQ Hub Module in degree of protection IP67 is suitable for installation outside control cabinets.

Технические данные



 

DME20 DRIVE-CLiQ Hub Module

6SL3055-0AA00-6AB0

Power requirement, max.

at 24 V DC without DRIVE‑CLiQ supply

0.15 A

  • Conductor cross-section, max.

4 × 0.75 mm2

Degree of protection

IP67

Dimensions

 

  • Width

99 mm (3.90 in)

  • Height

149 mm (5.87 in)

  • Depth

55.7 mm (2.19 in; without connector)

Weight, approx.

0.8 kg (1.76 lb)

Approvals, according to

cULus