SMC40 Sensor Module Cabinet-Mounted Siemens

Обзор



SMC40 Sensor Module Cabinet-Mounted

The SMC40 Sensor Module Cabinet-Mounted is required to evaluate the encoder signals of motors without a DRIVE-CLiQ interface. External encoders can also be connected via the SMC40.

The following encoder signals can be evaluated:

  • Absolute encoder EnDat 2.2

Дизайн



The SMC40 Sensor Module Cabinet-Mounted features the following connections and interfaces as standard:

  • 2 encoder system interfaces
  • 2 DRIVE‑CLiQ interfaces
  • 1 connection for the electronics power supply via the 24 V DC supply connector
  • 1 PE (protective earth) connection

The status of the SMC40 Sensor Module Cabinet-Mounted is indicated via a multi-color LED.

The SMC40 Sensor Module Cabinet-Mounted can be snapped onto a TH 35 standard mounting rail in accordance with EN 60715 (IEC 60715).

The maximum encoder cable length between SMC40 modules and encoder systems is 100 m (328 ft). The specified supply voltage of the encoder must be observed. The maximum cable length for DRIVE-CLiQ cables is 30 m (98 ft).

The signal cable shield can be connected to the SMC40 Sensor Module Cabinet‑Mounted via a shield connection terminal, e.g., Phoenix Contact type SK8 or Weidmüller type KLBÜ CO 1. The shield connection terminal must not be used for strain relief.

Интеграция



SMC40 Sensor Modules Cabinet-Mounted communicate with a Control Unit via DRIVE‑CLiQ.

Технические данные



 

SMC40 Sensor Module Cabinet‑Mounted

6SL3055-0AA00-5DA0

Power requirement, max.

At 24 V DC,
not taking encoder into account

0.1 A

  • Conductor cross-section, max.

2.5 mm2

  • Fuse protection, max.

20 A

Power loss, max.

4 W

Encoders which can be evaluated

Absolute encoder EnDat 2.2

PE connection

M4 screw

Dimensions

 
  • Width

30 mm (1.18 in)

  • Height

150 mm (5.91 in)

  • Depth

111 mm (4.37 in)

Weight, approx.

0.45 kg (1 lb)

Approvals, according to

cULus