For SIMOTICS L-1FN3 motors Siemens
Технические данные
For SIMOTICS L‑1FN3 linear motors, peak/continuous load versions, connection to SINAMICS S120 through adapter cable with full-thread connector
No. of cores × cross-section | Thread | Pre-assembled adapter cable | Connector size | Pre-assembled basic cable to the drive system | Cable sold by the meter1) for pre-assembled adapter cable | Dmax | Weight | Smallest perm. bending radius2) |
|---|---|---|---|---|---|---|---|---|
mm2 | Article No.3) | Article No. | Article No. | mm (in) | kg/m (lb/ft) | mm (in) | ||
4 × 2.5 | M20 | 6FX7002‑5LM42‑.... | 1 | 6FX8002‑5CS11‑.... | 6FX8008‑1BB21‑.... | 11.0 (0.43) | 0.20 (0.13) | 90 (3.54) |
4 × 2.5 | M20 | 6FX7002‑5LM62‑.... | 1 | 6FX8002‑5CS11‑.... | 6FX8008‑1BB21‑.... | 11.0 (0.43) | 0.20 (0.13) | 90 (3.54) |
4 × 4 | M32 | 6FX7002‑5LM72‑.... | 1.5 | 6FX8002‑5CS41‑.... | 6FX8008‑1BB31‑.... | 12.3 (0.48) | 0.27 (0.18) | 100 (3.94) |
4 × 6 | M32 | 6FX7002‑5LM82‑.... | 1.5 | 6FX8002‑5CS54‑.... | 6FX8008‑1BB41‑.... | 14.9 (0.59) | 0.41 (0.28) | 120 (4.72) |
4 × 10 | M32 | 6FX7002‑5LM32‑.... | 1.5 | 6FX8002‑5CS64‑.... | 6FX8008‑1BB51‑.... | 18.2 (0.72) | 0.62 (0.42) | 140 (5.51) |
4 × 16 | M32 | 6FX7002‑5LM02‑.... | 1.5 | 6FX8002‑5CS24‑.... | 6FX8008‑1BB61‑.... | 22.3 (0.88) | 1.01 (0.68) | 170 (6.69) |
MOTION‑CONNECT 700 | 7 | |||||||
MOTION‑CONNECT 800PLUS | 8 | 8 | ||||||
Length code | .... | .... | .... | |||||
1) Note type of delivery.
2) Valid for installation in a cable carrier.
3) The 6FX7002‑5LM.. cables comprise MOTION‑CONNECT 800PLUS cables which are sold by the meter.
*) For SIMOTICS L‑1FN30/‑1FN31 motors only.
**) For SIMOTICS L‑1FN33/‑1FN34/‑1FN36/‑1FN39 motors only.
***) For SIMOTICS L‑1FN3 linear motors in the peak load version, the pre-assembled basic cable 6FX8002‑5CS54‑.... (4 × 6 mm2) to the SINAMICS S120 drive.
Дополнительно
Power cable extensions for SIMOTICS L‑1FN3 linear motors, peak/continuous load versions with full-thread connector
No. of cores × cross-section | Connector size | Pre-assembled basic cable to the drive system | Extension |
|---|---|---|---|
mm2 | Type | Article No. | |
4 × 2.5 | 1 | 6FX8002‑5CS11‑.... | 6FX8002‑5CA15‑.... |
4 × 4 | 1.5 | 6FX8002‑5CS41‑....*) | 6FX8002‑5CA48‑.... |
4 × 6 | 1.5 | 6FX8002‑5CS54‑.... | 6FX8002‑5CA58‑.... |
4 × 10 | 1.5 | 6FX8002‑5CS64‑.... | 6FX8002‑5CA68‑.... |
4 × 16 | 1.5 | 6FX8002‑5CS24‑.... | 6FX8002‑5YW12‑.... |
MOTION‑CONNECT 800PLUS | 8 | ||
Length code | .... | ||
*) For SIMOTICS L‑1FN3 linear motors in the peak load version, the pre-assembled basic cable 6FX8002‑5CS54‑.... (4 × 6 mm2) to the SINAMICS S120 drive system must be used.
The combinations of power cable extensions shown are only provided by way of example.
Ответ от производителя может занять до 5 дней и более.
