Product code key Siemens

Обзор



The product code consists of a combination of digits and letters and is divided into three blocks linked by hyphens for better clarity. In blocks 1 and 2 the coupling series, the type and the size are encoded. Block 3 contains information applying only to the coupling specified in blocks 1 and 2. The three blocks of the product code are supplemented by information on the bore of the coupling hub parts and information on “Special types”.

The bore details with the code letter L always refer to the bore diameter D1 of the hub part shown on the left on the dimension drawing. The order code beginning with M always refers to the bore diameter D2 of the hub part shown on the right on the dimension drawing.

“Special types” are linked to the 3rd block of the product code by appending the code “-Z”. Special order requirements are, for example, fine balancing G6.3 or the ATEX design of the coupling.

With this product code key, the couplings shown in the catalog can be completely specified. No further textual details are required, they should be avoided. Couplings in special variants are specified with the digit 9 in the 4th place in the product code (block 1) and additionally with 00-0AA0 in positions 11 to 16. Series, type and size should, as far as possible, be specified in accordance with the coding for the standard coupling. By appending “-Z Y99”, plain text information can be included. The plain text information can then clearly specify the features of the special coupling.

Structure of the product code

Position

1

2

3

4

5

6

7

-

8

9

10

11

12

-

13

14

15

16

 

FLENDER Standard Couplings

Positions 1 to 3
digit, letter, letter

Type

2

L

C

                

Position 4
digit

Coupling design

0 … 9

              

Places 5 to 6
digits

Series

❑

❑

            

Positions 7 to 8
digits

Size

❑

❑

❑

         

Positions 9 and 10
letters

Type, subassembly or component part

❑

❑

       

Position 11
digit

Shaft-hub connection, flange connection

❑

      

Position 12
digit

Shaft-hub connection, flange connection, V-belt pulley

❑

     

Positions 13 to 16
digit, letter, letter, digit

Various details

❑

❑

❑

❑

Bore specifications

Additional order codes for bores finished in delivery condition ∅ D1 and ∅ D2
Specification of a 9 in the 11th position of the product code (product code without „-Z“) with order codes L.. for ∅D1
and/or
specification of a 9 in the 12th position of the product code (product code without „-Z“) with order codes M.. for ∅D2

Selection of order codes for diameter and tolerance in the following tables under "Bore specifications".

Special types

Additional order codes (product code with "-Z") and, if required, plain text

Selection of order codes in this catalog section and in catalog section 13 under "Special Types".

-Z