CPU 1511C-1 PN Siemens

Область применения

The CPU 1511C-1 PN is the entry-level CPU for applications with medium requirements for processing speed and speed of response in discrete production technology.

The CPU 1511C-1 PN has 5 analog inputs, via which the analog process signals, such as pressure or temperature can be recorded. Of these, four inputs can be used for current or voltage measurement and one input for resistance measurement.
The analog outputs integrated directly on the CPU convert a 16-bit digital value into a current or a voltage and output this to the process. They are suitable for controlling proportional valves, for example.
By means of the 16 integrated digital inputs, 24 V DC signals from plant the can be recorded directly on the controller.
The 16 integrated digital outputs switch 24 V DC voltages and thus transfer internal signals from the controller to the plant.
The integrated counters offer the possibility of recording signals as fast as 100 kHz and evaluating the counter status or the current speed directly in the controller without the need for additional modules. The speed can be output as a frequency or period, or as a user-normalized speed.
The Motion Control functions of the CPU can use the counters as an actual position value and the analog outputs as a setpoint speed output. In addition, the CPU offers comprehensive control functionalities via easy-to-configure blocks as well as the ability to connect drives via standardized PLC-open blocks.

The CPU 1511C-1 PN can be used as a PROFINET IO controller or as distributed intelligence (PROFINET I-Device). The integrated PROFINET IO IRT interface is designed as a 2-port switch so that a linear topology can be set up in the system.

Обзор

• The compact CPU with integral digital and analog inputs and outputs in the product spectrum of the S7-1500 Controllers
• With integrated technological functions
• Suitable for applications with medium requirements for program scope and processing speed
• Used as central controller in production lines with central and distributed I/O
• PROFINET IO IRT interface with 2-port switch
• PROFINET IO Controller for operating distributed I/O on PROFINET
• PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET I/O controller
• Isochronous mode
• Integrated Motion Control functionalities for controlling speed-controlled and positioning axes, support for external encoders
• Integrated web server with the option of creating user-defined web pages

Note

SIMATIC memory card required for operation of the CPU.

Дизайн

The CPU 1511C-1 PN has:

• A powerful processor:
  The CPU achieves command execution times as low as 60 ns per binary instruction.
• A large work memory:
  175 KB for program, 1 MB for data
• Integrated inputs/outputs;
  16 digital inputs and 16 digital outputs as well as 5 analog inputs and 2 analog outputs for current/voltage signals and an additional input for measuring temperature on the CPU.
• SIMATIC Memory Cards as load memory:
  permit additional functions such as datalog and archives
• Flexible expansion capability:
  single-tier configuration with max. 32 modules (CPU + 31 modules)
• Screen with functions for
  • the display of overview information, e.g. IP address of the integrated interface, station name, plant designation, location identifier, etc.,
  • display of diagnostics information
  • display of module information
  • display of a user-definable logo
  • showing display settings
  • setting IP addresses
  • setting the date and time
  • selecting the operating mode
  • resetting the CPU to factory settings
  • disabling/enabling the display
  • enabling protection levels.
• PROFINET IO IRT interface:
  for connecting distributed I/O via PROFINET.

Функции

Performance

• Faster command processing, depending on the CPU type, language extensions and new data types.
• Even shorter response times of the CPUs due to considerably faster backplane bus.
• Powerful network connection:
  each CPU is equipped with PROFINET IO IRT (2-port switch) as a standard interface.
• Integrated technology
  • Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen).
  • Support of speed-controlled and positioning axes as well as external encoders, positionally precise gearing between axes.
  • Integrated I/O, e.g. for the direct operation of analog axes or for the direct recording of HTL sensors.
  • Design of the counter functions in the configuration and programming compatible with the TM Count 2x24V module.
  • Trace functions for all CPU tags, both for diagnostics in real time as well as for sporadic error detection.
  • Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality.
• Security Integrated
  • Password-based know-how protection against unauthorized read-out and modification of program blocks.
  • Copy protection for tying individual blocks to the serial number of the SIMATIC Memory Card: The block can only run if the configured memory card is inserted in the CPU.
  • 4-level authorization concept:
    Communication with the HMI devices can also be restricted.
  • Manipulation protection:
    The controller recognizes modified or unauthorized transmissions of the engineering data.
• Design and handling
  • Display of the overview information:
    e.g. station name, plant identifier, location designation, etc., diagnostic information, module information, display settings.
  • Operator control options on the display:
    set addresses of the CPU or connected Ethernet communications processors, set date and time, select operating mode of CPU, reset CPU to factory settings, disable/enable display, activate protection levels.
• Integrated system diagnostics
  • System diagnostics information is displayed consistently and in plain text in the display, TIA Portal, HMI devices and Web server, even for messages from the drives, and updated even if the CPU is in STOP mode.
  • Integrated into the firmware of the CPU, no special configuration is required
• SIMATIC Memory Card (required for operation of the CPU)
  • Used as a plug-in load memory or for updating the firmware.
  • Also for storing additional documents or csv files (for recipes and archives)
  • Creation of data blocks for storage/reading of data via SFCs of the user program
• Datalog (archives) and recipes
  • Storage of csv files for recipes and archives on the SIMATIC memory card;
    easy access to plant-relevant operating data using Office tools or via a Web server
  • Easy access to machine configuration data by means of a Web browser or SD card reader (two-way data exchange from and to the controller)
• Programming
  • Programming with STEP 7 Professional, V13 SP 1 UPD 4 or higher
  • Migration tool for migrating from SIMATIC S7-300/S7-400 to S7-1500, converts the program code largely automatically. Non-convertible code is logged and can be manually adapted.
  • S7-1200 basic programs can be transferred to the S7-1500 by copying and pasting.

Технические данные

Дальнейшая информация

Further information and downloads

Manuals

The SIMATIC S7-1500 manuals can be downloaded free of charge from the Internet (SIMATIC Customer Support).

http://support.automation.siemens.com/WW/view/en/86140384

SIMATIC S7-1500 Display Simulator

Using the Display Simulator of the S7-1500, you can become familiar in advance with the different setting options and functions on the display.

http://www.automation.siemens.com/salesmaterial-as/interactive-manuals/getting-started_simatic-s7-1500/disp_tool/start_en.html

General information

http://www.siemens.com/S7-1500

SIMATIC Selection Tool

http://www.siemens.com/tia-selection-tool

Brochures

Information material for downloading can be found on the Internet:

http://www.siemens.com/simatic/printmaterial