PM 1507, 24 В DC/8 A Siemens

Order No.

6EP1 333-4BA00

Product

S7-1500 PM1507

Power supply, type

24 V/8 A

Input

Input

1-phase AC

Rated voltage Uin rated min.

Supply voltage

• 1 for AC minimum rated value

• 2 for AC minimum rated value

Rated voltage Uin rated max.

Supply voltage

• 1 for AC maximum rated value

• 2 for AC maximum rated value

• 1 for AC rated value

120 V

• 2 for AC rated value

230 V

• with DC

…

• Note

Automatic range selection

Voltage range

…

Input voltage

• 1 for AC

85 … 132 V

• 2 for AC

170 … 264 V

• with DC

…

Overvoltage strength

2.3 x Uin rated, 1.3 ms

Mains buffering at lout rated, min.

20 ms

Mains buffering

at Uin = 93/187 V

Rated line frequency

• 1

50 Hz

• 2

60 Hz

Line frequency range

45 … 65 Hz

Input current

• at rated value of input voltage 120 V rated value

3.7 A

• at rated value of input voltage 230 V rated value

1.7 A

• at rated value of input voltage 400 V rated value

• at rated value of input voltage 500 V rated value

• for DC at rated value of input voltage 600 V rated value

Switch-on current limitation (+ 25 °C), max.

62 A

I²t, max.

12 A²·s

Built-in input fuse

T 6.3 A/250 V (not accessible)

Protection in the supply feeder (IEC 898)

Recommended miniature circuit breaker: 16 A, characteristic B or 10 A, characteristic C

Output

Output

Controlled, isolated DC voltage

Rated voltage Uout rated DC

24 V

Total tolerance, static ±

1 %

Static mains compensation, approx.

0.1 %

Static load compensation, approx.

0.1 %

Residual ripple, peak-peak, max.

50 mV

Residual ripple, peak-peak, typ.

Spikes peak-peak, max. (bandwidth approx. 20 MHz)

150 mV

Spikes peak-peak, typ. (bandwidth approx. 20 MHz)

Adjustment range

…

Product function: output voltage is adjustable

No

Setting the output voltage

Note

Status display

LED green for 24 V O.K.; LED red for fault; LED yellow for stand-by

Signaling

On/off behavior

No overshoot of Uout (soft start)

Startup delay, max.

1.5 s

Note

Voltage rise, typ.

10 ms

Maximum voltage rise time of the output voltage

Rated current Iout rated

8 A

Current range

0 … 8 A

Note

typical active power output

192 W

short-term overload current in the event of a short circuit during startup, typical

35 A

Duration of the overload capability overcurrent in the event of a short circuit during startup

70 ms

constant overload current in the event of a short circuit during startup, typical

short-term overload current in the event of a short circuit during operation, typical

35 A

Duration of the overload capability overcurrent in the event of a short circuit during operation

70 ms

constant overload current in the event of a short circuit during operation, typical

Parallel switching for enhanced performance

Yes

Note

Parallel connection of 3 A and 8 A possible; devices must be activated simultaneously, at I load max. 75 % per device

Number of devices that can be switched in parallel to increase performance, units

2

Efficiency

Efficiency at Uout rated, lout rated, approx.

90 %

Power loss at Uout rated, lout rated, approx.

21 W

Closed-loop control

Dynamic mains compensation (Uin rated ± 15 %), max.

0.1 %

Dynamic load compensation (Iout: 50/100/50 %), Uout ± typ.

2 %

Load-step setting time 50 to 100 %, typ.

Load-step setting time 100 to 50 %, typ.

Setting time, maximum

5 ms

Protection and monitoring

Output overvoltage protection

additional control loop, differentiation (closed-loop control) at < 28.8 V

Response value current limitation

• minimum

8.4 A

• maximum

9.6 A

Current limitation, typ.

9 A

Property of the output, short-circuit-proof

Yes

Short-circuit protection

Electronic shutdown, automatic restart

Sustained short-circuit current rms value, typical

Note

Overload/short-circuit indicator

-

Security

Primary/secondary isolation

Yes

Electrical isolation

Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 and EN 61131-2

Protection class

Class I

Leakage current

• Maximum

3.5 mA

• Typical

1.3 mA

CE marking

Yes

UL/CSA approval

UL/cUL (CSA) approval

Available soon

Explosion protection

Available soon

FM approval

FM approval

CB approval

Yes

Marine approval

Degree of protection (EN 60529)

IP20

EMC

Emitted interference

EN 55022 Class B

Supply harmonics limitation

EN 61000-3-2

Noise immunity

EN 61000-6-2

Operating data

Ambient temperature

• during operation

0 … 60 °C

• Note

with natural convection

Ambient temperature

• during transport

-40 … +85 °C

• During storage

-40 … +85 °C

Humidity class according to EN 60721

Climate class 3K3, without condensation

Mechanical system

Connections

Screw/spring-type connection technology

Connections

• Supply input

L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm²

• Output

L+, M: 2 screw terminals each for 0.5 ... 2.5 mm²

• Auxiliary contacts

Width of enclosure

75 mm

Height of enclosure

147 mm

Depth of enclosure

129 mm

Mounting width

75 mm

Mounting height

205 mm

Weight, approx.

0.74 kg

Product property of the enclosure: side-by-side enclosure

Yes

Type of mounting

• Wall mounting

No

• DIN rail mounting

No

• S7-300 rail mounting

No

Installation

can be mounted onto S7-1500 rail

electrical accessories

mechanical accessories