SIPLUS S7-300 DM 370 dummy modules Siemens

Область применения



The DM 370 dummy module enables a non-parameterized S7-300 signal module to be retrofitted to an existing overall configuration. It is installed instead of the signal module. When it is replaced by the signal module, the mechanical configuration and the address assignments/address settings of the overall configuration remain unchanged.

Обзор


  • Dummy module for reserving slots for unconfigured signal modules
  • Retention of design and address assignment when replacing with a signal module

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.

Технические данные



Order number

6AG1370-0AA01-7AA0

SIPLUS S7-300 DUMMY-BG

Input current

 

from backplane bus 5 V DC, max.

5 mA

Power loss

 

Power loss, max.

0.03 W

Digital inputs

 

Number of digital inputs

0

Digital outputs

 

Number of digital outputs

0

Standards, approvals, certificates

 

CE mark

Yes

Ambient conditions

 

Ambient temperature during operation

 

  • min.

-40 °C; = Tmin

  • max.

70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use

Extended ambient conditions

 

  • relative to ambient temperature-atmospheric pressure-installation altitude

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)

Запрос коммерческого предложения

×

    * Поля, обязательные для заполнения.

    Сообщение отправлено

    ×

    В ближайшее время сообщение будет обработано.

    Письмо с номером обращения отправлено на Ваш почтовый ящик.

    Спасибо за то, что выбрали Первый ZIP!

    Что-то пошло не так...

    ×

    К сожалению, наша система расценила Ваше сообщение как спам.

    Если это произошло по ошибке, пожалуйста, обратитесь к нам по электронной почте.

    Приносим извинения за возможные неудобства.