IM 460-1 Siemens

Область применения

The IM 460-1 interface module is intended for use as a send IM for central connection over short distances of up to 1.5 m. It transfers data from the P-bus only to the expansion racks.

The IM 460-1 is intended for use only in association with the IM 461-1 interface module (in the expansion racks).

Обзор

• Send interface module for central expansion to 1.5 m
• Transmission of P bus
• With voltage supply for expansion units
• Can be plugged into the central controller
• Up to 2 expansion racks can be connected (up to 1 per interface)
• Can be used exclusively with IM 461-1

Дизайн

The IM 460-1 interface module can be inserted into the following central controllers:

• UR1,
• UR2 and
• CR2.

No more than 2 expansion units can be connected (1 per interface). No more than 2 IM 460-1 units can be plugged in per central controller.

The IM 460-1 supplies the modules in the connected expansion units with the 5 V supply voltage (max. 5 A per interface). In this case, there must be no power supply module in the downstream expansion units.

The module has:

• 3 LEDs for indicating faults.
• 2 interfaces for connecting the expansion lines via 468-3 connecting cable.

Технические данные

Дальнейшая информация

Brochures

Information material for downloading can be found in the Internet:

http://www.automation.siemens.com/infocenter