SIPLUS isolation modules Siemens

Обзор


  • Permits combined operation of fail-safe signal modules in safety mode and standard S7-300 modules in the same ET 200M system.
  • The isolation module is not required if the safety class SIL 3 or safety category < Cat. 4 is to be achieved.

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.

Технические данные



Order number

6AG1195-7KF00-2XA0

SIPLUS S7-300 TRENNBAUGRUPPE

Standards, approvals, certificates

 

CE mark

Yes

UL approval

Yes; File E239877

FM approval

Yes; CofC 3028431

Ambient conditions

 

Ambient temperature during operation

 

  • ● min.

-25 °C; = Tmin

  • ● max.

60 °C; = Tmax

Extended ambient conditions

 

  • ● relative to ambient temperature-atmospheric pressure-installation altitude

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)

Relative humidity

 

  • — With condensation, tested in accordance with IEC 60068-2-38, max.

100 %; RH incl. condensation/frost (no commissioning under condensation conditions)

Resistance

 

  • — against biologically active substances / conformity with EN 60721-3-3

Yes

  • — against chemically active substances / conformity with EN 60721-3-3

Yes

  • — against mechanically active substances / conformity with EN 60721-3-3

Yes

Weights

 

Weight, approx.

10 g