RF690L Siemens

Обзор



The SIMATIC RF690L heat-resistant on-metal label is designed for direct mounting on metal surfaces subject to high thermal stresses (up to +230 °C) and under these conditions can achieve a read range of up to 5 m.

This transponder is available in two frequency versions for 865 to 868 MHz (ETSI) and 902 to 928 MHz (FCC, CMIIT).

Технические данные



Order number

6GT2810-2AG00

6GT2810-2AG10

Product type designation

RF690L transponder

RF690L transponder

Suitability for operation

RF600

RF600

Wireless frequencies

 

 

Operating frequency

865 ... 868 MHz

902 ... 928 MHz

Electrical data

 

 

Range maximum

5 m; observe system manual RF600: overrange is possible, range is reader dependent: observe http://support.automation.siemens.com/WW/view/en/67384964

5 m; observe system manual RF600: overrange is possible, range is reader dependent: observe http://support.automation.siemens.com/WW/view/en/67384964

Protocol with radio transmission

EPCglobal Class 1 Gen 2 / ISO 18000-6C

EPCglobal Class 1 Gen 2 / ISO 18000-6C

Transfer rate with radio transmission maximum

320 kbit/s

320 kbit/s

Product property multitag-capable

Yes

Yes

Polarization

Linear

Linear

Product component Backup battery

No

No

Memory

 

 

Type of memory

EEPROM

EEPROM

Storage capacity of the user memory

64 byte

64 byte

Type of memory organization

EPC memory 96/480 bits, user memory 64/16 bytes (512/128 bits), TID memory 12 bytes

EPC memory 96/480 bits, user memory 64/16 bytes (512/128 bits), TID memory 12 bytes

Number of read cycles at ambient temperature < 40 °C maximum

100 000 000 000 000

100 000 000 000 000

Number of write cycles at ambient temperature < 40 °C maximum

500

500

Data retention time at ambient temperature < 40 °C not less than

50 y

50 y

Property of memory

lock, unlock, kill, write protection, password protection

lock, unlock, kill, write protection, password protection

Type of transponder chip used

Alien Higgs 3

Alien Higgs 3

Mechanical data

 

 

Material

Top side: PET

Top side: PET

Color

beige / silver

beige / silver

Mounting distance relating to metal surfaces recommended minimum

0 mm

0 mm

Permitted ambient conditions

 

 

Ambient temperature

 

 

  • ● during read/write access

-25 ... +85 °C

-25 ... +85 °C

  • ● outside the read/write area

-25 ... +230 °C

-25 ... +230 °C

  • ● during storage

13 ... 23 °C

13 ... 23 °C

Ambient condition for operation

Operating temperature permanent up to 95 °C, 3 cycles of 30 minutes each or one time 90 minutes up to 230 °C

Operating temperature permanent up to 95 °C, 3 cycles of 30 minutes each or one time 90 minutes up to 230 °C

Protection class IP

IP67

IP67

Resistance to mechanical stress

Torsion and bending stress conditionally permissible

Torsion and bending stress conditionally permissible

Design, dimensions and weight

 

 

Width

88 mm

75 mm

Height

1.6 mm

1.6 mm

Depth

25 mm

25 mm

Net weight

5 g

5 g

Mounting type

one-side adhesible

one-side adhesible

Product properties, functions, components general

 

 

Product property

 

 

  • ● silicon-free

Yes

Yes

  • ● printable

Yes

Yes

Printing process

Thermal transfer process

Thermal transfer process