SIMATIC MV340 Siemens

Обзор



The SIMATIC MV340 is one of the most powerful handheld readers in the world and is thus particularly suitable for demanding applications. The reader reads a wide range of direct part markings (DPM), from linear barcodes all the way to 2D symbols. Different codes can be read without having to reconfigure the device.

The optical MV340 handheld reader is designed for close ranges and records codes at a distance of up to 50 mm. The optimum reading distance is 6 mm. The special integrated lighting is ideal for a wide variety of surfaces and increases the contrast with stamped codes. Low-contrast reading despite fluctuating lighting conditions and twisted or damaged codes are the strengths of the SIMATIC MV340.

The SIMATIC MV340 handheld reader is connected via a USB or RS232 interface to the IT system.

Дизайн



The SIMATIC MV340 is a fully integrated device that combines a powerful reader unit and lighting in a rugged housing with an ergonomically shaped handle. The read process is triggered by a switch on the handle. Feedback from the read process can be optical via a multi-color LED, acoustic, or by means of a vibrating alarm.

The special integrated lighting unit can switch automatically between different lighting types to always provide optimal lighting conditions for a wide range of code and surface types. Even low-contrast codes or dot peen markings are therefore no longer a problem.

The device is supplied with a USB cable as standard. An RS232 cable can be ordered separately as an accessory.

Интеграция



The SIMATIC MV340 is connected via USB or RS232. The free ESP software is available for user-friendly set-up of the device. As an alternative, the device can be installed and operated without special software since it can also be configured by reading supplied data matrix codes.

The SIMATIC MV340 handheld reader can be connected directly to the RF170C communication module.

The power supply is solely via cable. If the device is connected via USB to the host computer, the supply voltage is applied directly via the USB port. If the connection is via RS232, an additional power supply unit is required which is coupled to the RS232 connector via Y-cable. The power supply unit is available in three variants: EU, UK, and USA.

Чертеж



SIMATIC MV340 optical handheld reading device

Технические данные



Order number

6GF3340-0HT01

Product type designation

MV340 hand-held reader

Suitability for operation

1D codes: Int. 2/5, Code 128, Code 93, Code 39, EAN/UPC, Codabar, BC 412, 2D codes: DMC, PDF417, QR, GS1 Databar

Range

0 ... 50 mm

Range Note

Code-dependent

Optical data

 

Design of image sensor of the camera

CMOS 1280 x 1024

Mounting type of lens

Integrated

Type of light source

Lighting system comprising diffuse incident light (red, blue) and dark field (red)

Image acquisition frequency maximum

10 Hz

Type of focusing

Fixed focus, optimum focal point at 6.3 mm

Supply voltage, current consumption, power loss

 

Type of current supply

via USB or external plug-type power supply unit (RS232), 5 V, 410 mA

Type of battery

--

Permitted ambient conditions

 

Ambient temperature

 

  • ● during operation

0 ... 50 °C

  • ● during storage

-20 ... +65 °C

Relative humidity at 25 °C without condensation during operation maximum

95 %

Height of fall maximum

1.8 m

Design, dimensions and weight

 

Width

180 mm

Height

63 mm

Depth

114 mm

Net weight

0.2 kg

Product properties, functions, components general

 

Design of the display

Multi-color LED

Operator element version

Trigger in handle

Design of acoustic signaling element

Vibration alarm, audible signal

Design of the interface

USB, RS232

Product functions management, configuration

 

Product function of the software

Read, display, save, transfer codes

Type of programming

optical parameterization or via configuration software

Accessories

 

accessories

RS232 cable with power supply