Модуль IE/WSN-PA LINK Siemens

Transmission rate

Transfer rate

• ● at the 1st interface

10 ... 100 Mbit/s

10 ... 100 Mbit/s

• ● at the 2nd interface

10 ... 100 Mbit/s

10 ... 100 Mbit/s

• ● at interface 3

9.6 ... 57.6 kbit/s

9.6 ... 57.6 kbit/s

Interfaces

Number of electrical connections

• ● at the 1st interface acc. to Industrial Ethernet

1

1

• ● at the 2nd interface acc. to Industrial Ethernet

1

1

• ● at interface 3 acc. to RS 485

1

1

• ● for power supply

1

1

Type of electrical connection

• ● at the 1st interface acc. to Industrial Ethernet

RJ 45 port

RJ 45 port

• ● at the 2nd interface acc. to Industrial Ethernet

RJ 45 port

RJ 45 port

• ● at interface 3 acc. to RS 485

2-pole terminal strip

2-pole terminal strip

• ● for power supply

3-pole terminal strip

3-pole terminal strip

Interfaces wireless

Number of radio cards permanently installed

1

1

Number of internal antennas

1

0

Number of electrical connections for external antenna(s)

0

1

Type of electrical connection for external antenna(s)

-

N-Connector

Supply voltage, current consumption, power loss

Type of voltage supply

DC

DC

Supply voltage external

24 V

24 V

Supply voltage external

20 ... 28 V

20 ... 28 V

Consumed current from external supply voltage for DC at 24 V maximum

0.5 A

0.5 A

Active power loss maximum

12 W

12 W

Permitted ambient conditions

Ambient temperature

• ● during operation

-40 ... +70 °C

-40 ... +70 °C

• ● during storage

-40 ... +85 °C

-40 ... +85 °C

• ● during transport

-40 ... +85 °C

-40 ... +85 °C

Relative humidity at 25 °C without condensation during operation maximum

90 %

90 %

Protection class IP

IP 65

IP 65

Design, dimensions and weight

Width of the enclosure

229 mm

229 mm

Height of the enclosure

• ● without antenna

306 mm

306 mm

• ● with antenna

354 mm

354 mm

Depth of the enclosure

89 mm

89 mm

Net weight

4.54 kg

4.54 kg

Mounting type

Material for mast mounting included in scope of delivery

Material for mast mounting included in scope of delivery

• ● wall mounting

Yes

Yes

• ● mast mounting

Yes

Yes

Wireless frequencies

Operating frequency for WirelessHART in 2.4 GHz frequency band

2.4 ... 2.5 GHz

2.4 ... 2.5 GHz

Performance data WirelessHART

Number of WirelessHART devices usable

100

100

Network latency

• ● for 100 field devices for WirelessHART network maximum

10 s

10 s

• ● for 50 field devices for WirelessHART network maximum

5 s

5 s

Transmission link between two devices for WirelessHART network maximum

100 m

100 m

• ● Note

Values may vary in the case of radio obstacles

Values may vary in the case of radio obstacles

Protocol is supported HART protocol

Yes

Yes

Product properties, functions, components general

Protocol is supported

• ● Address Resolution Protocol (ARP)

Yes

Yes

• ● HTTP

Yes

Yes

• ● HTTPS

Yes

Yes

• ● Modbus TCP

Yes

Yes

• ● Modbus TCP secure

Yes

Yes

• ● Modbus RTU

Yes

Yes

Product functions management, configuration

Product function

• ● web-based management

Yes

Yes

• ● DHCP client

Yes

Yes

Product functions Diagnosis

Product function

• ● Web-based diagnostics

Yes

Yes

• ● WirelessHART diagnostics via Modbus

Yes

Yes

Product functions Redundancy

Product function Device redundancy

No

Yes

Product functions Security

Product function

• ● Password protection - multi-level

Yes

Yes

• ● WirelessHART Join Key

Yes

Yes

• ● ACL - MAC-based

Yes

Yes

• ● WirelessHART Network ID

Yes

Yes

Protocol is supported SSL

Yes

Yes

Principle of encryption

AES 128 bit

AES 128 bit

Product functions Time

Protocol is supported NTP

Yes

Yes

Standards, specifications, approvals

Standard for WirelessHART

HART V 7.1

HART V 7.1

Standard for wireless communication IEEE 802.15.4

Yes

Yes

Certificate of suitability

• ● CE marking

Yes

Yes

• ● relating to CSA

CSA Division 2 & Dust Ignition-proof for Class I, Division 2, Groups A, B, C, and D. Dust Ignition-proof for Class II, Groups E, F, and G / Suitable for Class III Hazardous Locations. / Install per Siemens drawing A5E02467236A. Temperature Code: T4 (-40°C < Ta < 60°C) CSA Enclosure Type 4X

CSA Division 2 & Dust Ignition-proof for Class I, Division 2, Groups A, B, C, and D. Dust Ignition-proof for Class II, Groups E, F, and G / Suitable for Class III Hazardous Locations. / Install per Siemens drawing A5E02467236A. Temperature Code: T4 (-40°C < Ta < 60°C) CSA Enclosure Type 4X

• ● relating to FM

FM Division 2, Non-Incendive for Class I, Division 2, Groups A, B, C, and D. Dust Ignition-proof for Class II, III, Division 1, Groups E, F, and G / Indoor and outdoor locations / NEMA Type 4X Temperature Code: T4 (-40°C < Ta < 60°C)

FM Division 2, Non-Incendive for Class I, Division 2, Groups A, B, C, and D. Dust Ignition-proof for Class II, III, Division 1, Groups E, F, and G / Indoor and outdoor locations / NEMA Type 4X Temperature Code: T4 (-40°C < Ta < 60°C)

• ● relating to ATEX

ATEX type n, see note: Certificate number: Baseefa10ATEX0044X, ATEX marking: Ex II 3 G, Ex nA nL IIC T4 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V, ATEX dust ignition-proof: Certificate number: Baseefa10ATEX0045X, ATEX marking: II 3 D, Ex tD A22 IP66 T135 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V. Note on type n: Conditions for safe handling during installation. The device does not pass the 500 V insulation test in accordance with paragraph 6.8.1 of EN 60079-15:2005. This must be taken into account when the device is mounted.

ATEX type n, see note: Certificate number: Baseefa10ATEX0044X, ATEX marking: Ex II 3 G, Ex nA nL IIC T4 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V, ATEX dust ignition-proof: Certificate number: Baseefa10ATEX0045X, ATEX marking: II 3 D, Ex tD A22 IP66 T135 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V. Note on type n: Conditions for safe handling during installation. The device does not pass the 500 V insulation test in accordance with paragraph 6.8.1 of EN 60079-15:2005. This must be taken into account when the device is mounted.

• ● relating to IECEx

IECEx Type n, see note: Certificate number: IECEx BAS 10.0014X, Ex nA nL IIC T4 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V, ATEX dust ignition-proof, see note: Certificate number: IECEx BAS 10.0015X, Ex tD A22 IP66 T135 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V. Note on type n: Conditions for safe handling during installation. The device does not pass the 500 V insulation test in accordance with paragraph 6.8.1 of EN 60079-15:2005. This must be taken into account when the device is mounted.

IECEx Type n, see note: Certificate number: IECEx BAS 10.0014X, Ex nA nL IIC T4 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V, ATEX dust ignition-proof, see note: Certificate number: IECEx BAS 10.0015X, Ex tD A22 IP66 T135 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V. Note on type n: Conditions for safe handling during installation. The device does not pass the 500 V insulation test in accordance with paragraph 6.8.1 of EN 60079-15:2005. This must be taken into account when the device is mounted.

Wireless approval

FCC and IC approval

IC approval