GPS Antennas Siemens

Область применения



Application examples:

  • Time synchronization
    Synchronization, e.g. of a church clock with UTC time (Universal Time Coordinated). The time is derived from the data of the GPS signal.
  • Position Sensing/ Container Tracking
    A container can be tracked with the help of GPS position data, for example.

Обзор



GPS antennas are used for the reception of signals in a global navigation satellite system. These signals help determine the exact position and time of the connected device.

The ANT895-6ML antenna supports the GPS, GLONASS and Galileo navigation satellite systems.

Функции



GPS antennas receive signals from various satellites and use this data to determine their exact position and time.

For optimal signal reception, the antenna must be mounted outdoors with a clear view of the sky.

By nature, the signal strength of the received data is rather weak. For the signals to still be evaluated reliably in the connected components, the ANT896-5ML comes equipped with an integrated, low-noise repeater. It is supplied with power from the active device (e.g. LOGO!CMR2020) via the antenna connection cable. The current consumption of the antenna is so low that it can also be provided by battery-operated GPS receivers.

In addition, the antenna comes equipped with a two-stage SAW filter with high attenuation which makes it possible to set up the antenna close to the senders.

Интеграция



LOGO! CMR with control cabinet feedthrough

Особенности


  • Uniform time of all nodes in the communication network through synchronization with satellite time
  • Exact positioning or tracking of individual devices connected to GPS by evaluating the received signals

Технические данные



Order number

6GK5895-6ML00-0AA0

Product type designation

Antenna ANT895-6ML

Suitability for operation

GPS

Wireless frequencies

 

Operating frequency

1575.42 MHz

type of satellite navigation system is supported GPS, GLONASS and Galileo

Yes

Electrical data

 

Design of the signal amplifier Integrated

two-stage, low noise

Supply voltage from antenna cable

2.7 ... 5 V

Type of voltage of the supply voltage

DC

Consumed current maximum

2 A; at 5 V

Amplification

20 dB

Design of the intermediate frequency filter

dual high rejection SAW filter

Polarization

circular, clockwise

Antenna gain compared to spherical radiator

 

  • ● with circular radiation

3 dB; at 90°

Number of electrical connections of the antenna

1

Type of electrical connection of the antenna

N-Connector

Design of plug-in connection

female

Permitted ambient conditions

 

Ambient temperature

 

  • ● during operation

-40 ... +85 °C

Protection class IP

IP67

Design of the overvoltage protection

Integrated protection up to 15 KV

Design, dimensions and weight

 

Width

45 mm

Height

51 mm

Depth

12 mm

Net weight

130 g

Mounting type

Magnet or screw mounting

Mounting type

 

  • ● directly on the device

No

Cable length of antenna cable

0.3 m

Product properties, functions, components general

 

Product property silicon-free

Yes

Standards, specifications, approvals

 

Certificate of suitability

 

  • ● RoHS conformity

Yes

Wireless approval

Current national approvals can be found on the Internet under www.siemens.com/mobilfunkzulassungen


Дальнейшая информация



Cabling range:

Pre-assembled connecting cables for IRC products can be found in the Industry Mall under antenna connection technology.

You can order supplementary components for the SIMATIC NET cabling range from your local contact. Technical advice on this subject is available from:

J. Hertlein
PD PA CI PRM 4
Phone: +49 911/750 44 65
E-mail: juergen.hertlein@siemens.com