IM 151-8 PN/DP CPU Siemens

Область применения

The IM 151-8 PN/DP CPU can be used for remote, distributed automation solutions with average programming complexity. It enables remote preprocessing of the process data on site and only transmits required data to the higher-level control unit. This results in the following advantages:

• Relieves the central control unit
• Short response times to critical signals on site
• Low data volume relieves bus system
• Pretested units and parallel commissioning enable faster set-up
• Autonomous machine units increase availability and flexibility
• Clear configuration processes

The IM 151-8 PN/DP CPU operates completely independent of the central control unit. If it fails, the IM 151-8 PN/DP CPU simply continues to run.

The bit-modular design of the ET 200S I/O system together with the IM 151-8 PN/DP CPU enable functionally oriented station design.

Обзор

• Interface module for SIMATIC ET 200S with integrated CPU S7-314
• For high-performance control solutions in ET 200S
• Increase of the availability of systems and machines
• PROFINET IO Controller for up to 128 IO Devices
• PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET IO controller
• PROFINET interface with integrated 3-port switch
• Isochronous mode on PROFINET
• With many communication options: PG/OP communication, PROFINET IO, PROFINET CBA, open IE communication (TCP, ISO-on-TCP and UDP), web server and S7-communication (with loadable FBs)
• Fast, simple and end-to-end programming of a system with modular programs via STEP 7
• Compact SIMATIC Micro Memory Card (MMC)
• Optional PROFIBUS master for 32 PROFIBUS DP slaves (with master interface 6ES7138-4HA00-0AB0)
• Fail-safe IM 151-8F PN/DP CPU PROFIsafe available

Note:
SIMATIC Micro Memory Card required for operation of CPU.