SIPLUS IM151-7 CPU Siemens

Область применения



The IM 151-7 CPU can be used for distributed automation solutions of average program scope. It supports distributed preprocessing of the process data locally, and communication with the master control as PROFIBUS DP slaves. This results in the following advantages:

  • Reduced load on the central controller
  • Short response times to critical onsite signals
  • Relief of bus system due to smaller data volumes
  • Faster commissioning due to pretested units and parallel startups
  • Increased availability and flexibility through autonomous machine units
  • Clear configuring

In the event of failure of the DP master, the IM 151-7 CPU continues to operate autonomously.

The fine-modular design of the ET 200S I/O system, together with the IM151-7 CPU, allows a function-oriented structure of the station with all the advantages of an intelligent slave.

Обзор


  • Interface module for SIMATIC ET 200S with integrated S7-CPU 314
  • For high-performance control solutions in ET 200S
  • Increase of the availability of systems and machines
  • Programming via PROFIBUS DP
  • Compact SIMATIC micro memory card (MMC)
  • Integrated 12 Mbit/s PROFIBUS DP slave/MPI interface in Cu version
  • Integrated CPU based on the CPU S7-314
  • IM 151-7 CPU FO available
  • Failsafe IM 151-7 F-CPU PROFIsafe available
  • Alternatively, as IM 151-8 (F) PN/DP CPU with PROFINET interface

Micro Memory Card required for operation of CPU.

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.

 

SIPLUS IM151-7 CPU

Article No.

6AG1151-7AA21-2AB0

BasedOn Article No.

6ES7151-7AA21-0AB0

Ambient temperature range

-25 °C … +70 °C

Conformal coating

Coating of the printed circuit boards and the electronic components

Technical data

The technical data of the standard product applies, except for the ambient conditions.



Ambient conditions

Relative humidity

100%, condensation/frost permitted. No commissioning in bedewed state.

Biologically active substances, compliance with EN 60721-3-3

Class 3B2 mold and fungal spores (excluding fauna). The supplied plug covers must remain in place over the unused interfaces during operation!

Chemically active substances, compliance with EN 60721-3-3

Class 3C4 incl. salt spray in accordance with EN60068-2-52 (degree of severity 3). The supplied plug covers must remain in place over the unused interfaces during operation!

Mechanically active substances, compliance with EN 60721-3-3

Class 3S4 incl. sand, dust. The supplied plug covers must remain in place over the unused interfaces during operation!

Air pressure (depending on the highest positive temperature range specified)

1 080...795 hPa (-1 000 ... +2 000 m)

See ambient temperature range

795...658 hPa (+2 000 ... +3 500m)

Derating 10 K
658 ... 540 hPa (+3 500 ... +5 000 m) derating 20 K



For technical documentation on SIPLUS, see:

http://www.siemens.de/siplus-extreme

Дальнейшая информация



Brochures

Information material for downloading can be found in the Internet:

http://www.siemens.com/simatic/printmaterial