SIPLUS IM151-8 PN/DP CPU Siemens

Область применения



The IM 151-8 PN/DP CPU can be used for remote, distributed automation solutions with average programming complexity. It enables remote preprocessing of the process data on site and only transmits required data to the higher-level control unit. This results in the following advantages:

  • Relieves the central control unit
  • Short response times to critical signals on site
  • Low data volume relieves bus system
  • Pretested units and parallel commissioning enable faster set-up
  • Autonomous machine units increase availability and flexibility
  • Clear configuration processes

The IM 151-8 PN/DP CPU operates completely independent of the central control unit. If it fails, the IM 151-8 PN/DP CPU simply continues to run.

The bit-modular design of the ET 200S I/O system together with the IM 151-8 PN/DP CPU enable functionally oriented station design.

Обзор


  • Interface module for SIMATIC ET 200S with integrated CPU S7-314
  • For high-performance control solutions in ET 200S
  • Increases the availability of plants and machinery
  • PROFINET IO Controller for up to 128 IO devices
  • PROFINET I-Device for connecting the CPU as an intelligent PROFINET device with a SIMATIC or third-party PROFINET I/O Controller
  • PROFINET interface with integrated 3-port switch
  • Isochronous mode on PROFINET
  • With multiple communication options: PG/OP communication, PROFINET IO, PROFINET CBA, open IE communication (TCP, ISO-on-TCP and UDP), Web server and S7 communication (with loadable FBs)
  • Fast, simple and uniform programming of a system with modular programs via STEP 7
  • Compact SIMATIC Micro Memory Card (MMC)
  • Optional PROFIBUS master for 32 PROFIBUS DP slaves (with master interface 6ES7 138-4HA00-0AB0)
  • Fail-safe IM 151-8F PN/DP CPU PROFIsafe available

Micro Memory Card required for operation of CPU.

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.

SIPLUS IM 151-8 PN/DP CPU

 

Article No.

6AG1151-8AB01-7AB0

BasedOn Article No.

6ES7151-8AB00-0AB0

Ambient temperature range

-40 ... +70°C

Conformal coating

Coating of the printed circuit boards and the electronic components

Technical data

The technical data of the standard product applies except for the ambient conditions.

Ambient conditions:

 

Relative humidity

100%, condensation/frost permitted. No commissioning in bedewed state.

Biologically active substances, compliance with EN 60721-3-3

Class 3B2 mold and fungal spores (excluding fauna). The supplied plug covers must remain in place over the unused interfaces during operation!

Chemically active substances, compliance with EN 60721-3-3

Class 3C4 incl. salt spray in accordance with EN60068-2-52 (degree of severity 3). The supplied plug covers must remain in place over the unused interfaces during operation!

Mechanically active substances, compliance with EN 60721-3-3

Class 3S4 incl. sand, dust. The supplied plug covers must remain in place over the unused interfaces during operation!

Air pressure (depending on the highest positive temperature range specified)

1 080...795 hPa (-1 000 … +2 000 m)

See ambient temperature range

795…658 hPa (+2 000 … +3 500 m)

Derating 10 K

658...540 hPa (+3 500 ... +5 000m)

Derating 20K



For technical documentation on SIPLUS, see:

http://www.siemens.de/siplus-extreme