TM150 Terminal Module Siemens

Обзор

TM150 Terminal Module

The TM150 Terminal Module is a DRIVE-CLiQ component for temperature evaluation. The temperature is measured in a temperature range from -99 °C to +250 °C (-146.2 °F to 482.0 °F) for the following temperature sensors:

• Pt100 (with monitoring for open-circuit and short-circuit)
• Pt1000 (with monitoring for open-circuit and short-circuit)
• KTY84 (with monitoring for open-circuit and short-circuit)
• PTC (with short-circuit monitoring)
• Bimetallic NC contact (without monitoring)

For the temperature sensor inputs, for each terminal block the evaluation can be parameterized for 1×2-wire, 2×2-wire, 3-wire or 4-wire. There is no galvanic isolation in the TM150 Terminal Module.

The temperature channels can be subdivided into 3 groups and evaluated together.

Дизайн

The following are located on the TM150 Terminal Module:

• 6 terminal blocks for max. 12 temperature sensors
• 2 DRIVE-CLiQ sockets
• 1 connection for the electronics power supply via the 24 V DC supply connector
• 1 PE/protective conductor connection

The status of the TM150 Terminal Module is indicated via a multi-color LED.

The TM150 Terminal Module can be snapped onto a TH 35 top-hat rail to EN 60715 (IEC 60715).

Интеграция

The TM150 Terminal Module can communicate via DRIVE‑CLiQ with the following Control Units.

• CU310‑2 Control Unit
• CU320‑2 Control Unit
• SINAMICS DCM Advanced CUD

Connection example of a TM150 Terminal Module

Технические данные