SIPLUS sync module for connecting the CPU 41xH Siemens

Область применения

The Sync module is required for connecting the two CPU 41x-4H in the S7-400H subunits.

Обзор

For linking the two CPUs 41x-5H in the subunits of the S7-400H
Can be plugged directly into the CPU

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.

Дизайн

The Sync module is plugged directly into the slot of the CPU 41x-4H reserved for it. Two Sync modules are required for each CPU. Modules in the subunits are connected by means of fiber-optic connecting cables.

Технические данные

Order number	6AG1960-1AA06-7XA0	6AG1960-1AB06-7XA0
	SIPLUS S7-400H IF960-H 10M	SIPLUS S7-400H IF960-H 10KM
Input current
from CPU, max.	220 mA	240 mA
Power loss
Power loss, typ.	0.77 W	0.83 W
Ambient conditions
Ambient temperature during operation
● min.	-25 °C; = Tmin	-25 °C; = Tmin
● max.	70 °C; = Tmax; @ 60°C for UL/ATEX/FM use	70 °C; = Tmax; @ 60°C for UL/ATEX/FM use
Extended ambient conditions
● relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width	13 mm	13 mm
Height	14 mm	14 mm
Depth	58 mm	58 mm
Weights
Weight, approx.	14 g	14 g