Tecsis — Standard: from 510 kg up to 10197 kg F3271
Наличие
Цена
Для уточнения цены нам необходимо связаться с производителем. Отправляйте запрос по почте, через корзину сайта или через форму заявки.
Ответим на Ваш запрос в течение 5 дней.
Доставка
- транспортной компанией на Ваш выбор
- самовывоз из офиса в Санкт-Петербурге
- бесплатная доставка до терминала “Деловые Линии” в Санкт-Петербурге
This typical load cell in shear beam design is constructed to have a high accuracy of 0,04% (optionally 0,02%) of the Full Scale. The Model F3271 series can be used to measure static compression or tension forces. It is available for nominal loads in the range of 510 to 10197 kg.
Features
- Designed for the weighing of loads
- Also for force measurement useable
- Typical shear beam design
- Accuracy of 0,04% full scale, optional 0,02% full scale
- Capaities starting from 510 kg
- Force applied through a blind hole
- Protection class IP 68/ IP 69k
0...510 kg up to 0...10197 kg
Application
Those force transducers are used in numerous application with the need for high accuracy and a robust design. The high accuracy allows to use the model F3271 series in weighing technology. The force transducers can also be used to measure static compression or tension forces. The bending beam is is mounted by using the two fastening bores on the cable side.The force is applied at the opposite side, vertically to theaxis of load cell via a through-hole. Because of the stainless steel construction and high protection class IP68/IP69k, they suit for the use in tough environments. The special calibration technique (mV/V/Ohm) allows to pass on corner balancing when using several load cells.
Техническая спецификация ae932.pdf
О компании Tecsis
Как производитель датчиков и измерительных приборов компания присутствует на рынке уже несколько десятилетий. К 1997г. она вышла на мировой рынок под эгидой бренда VDO, но уже в 2001 отделилась под собственным именем Tecsis.
Читать далее...