Installation electronics DOLD
Time switches (19)
• Setting range: for long times 3 ... 60 min
• For 4-wire circuit L on push button and
3-wire circuit N on push button
• With pre-warning shortly before end of time delay
• Light can be switched off before pre-warning
• Light can be retriggered after pre-warning
• Switch for continuous light on unit
• Contact: 16 A
• Width 17.5 mm
• Setting range: for long times 3 ... 60 min
• For 4-wire circuit L on push button and
3-wire circuit N on push button
• With pre-warning shortly before end of time delay
• Light can be switched off before pre-warning
• Light can be retriggered after pre-warning
• Switch for continuous light on unit
• Contact: 16 A
• Width 17.5 mm
• Setting range: short pressing of button 0.5 ... 10 min
long pressing of button 2 ... 40 min
• For 4-wire circuit L on push button and
3-wire circuit N on push button
• Can be retriggered
• With pre-warning shortly before end of time delay
• Switch for continuous light on unit
• Contact: 16 A
• Width 17.5 mm
• Setting range 0.5 ... 10 min.
• For 4-wire circuit L on push button and
3-wire circuit N on push button
• Can be retriggered
• With pre-warning shortly before end of time delay
• Switch for continuous light on unit
• Contact: 16 A
• Width 17.5 mm
• Setting range 0.5 ... 10 min.
• For 4-wire circuit L on push button and
3-wire circuit N on push button
• Can be retriggered
• with pre-warning shortly before end of time delay
• Switch for continuous light on unit
• Contact: 16 A
• Width 17.5 mm
• Setting range 0.5 ... 10 min.
• For 3-wire circuit N on push button
• Can not be retriggered
• Switch for continuous light on unit
• Contact: 16 A
• Width 17.5 mm
• Setting range 0.5 ... 10 min.
• For 3-wire circuit N on push button
• Can be not retriggered
• Switch for continuous light on unit
• Contact: 16 A
• Width 17.5 mm
• Setting range 0.5 ... 10 min.
• For 4-wire circuit L on push button and
3-wire circuit N on push button
• Can be retriggered
• Switch for continuous light on unit
• Contact: 16 A
• Width 17.5 mm
• With 2 delay times
- 0.3 ... 5 min. if the pushbutton is pressed briefly (< 1 s)
- 1.2 ... 20 min. if the pushbutton is pressed for a long time (> 1 s)
i.e. the delay time is four times as long
• Operating time adjustment with a screwdriver
• Reswitching possible
• IK 8825 with permanent light switch
• Permanent light as long as the pushbutton is pressed
• IK 8825 for installation on a top hat rail
• OA 8825 for installation in flush-mounted boxes
• Width IK 8825 17.5 mm
• With 2 delay times
- 0.3 ... 5 min. if the pushbutton is pressed briefly (< 1 s)
- 1.2 ... 20 min. if the pushbutton is pressed for a long time (> 1 s)
i.e. the delay time is four times as long
• Operating time adjustment with a screwdriver
• Reswitching possible
• IK 8825 with permanent light switch
• Permanent light as long as the pushbutton is pressed
• IK 8825 for installation on a top hat rail
• OA 8825 for installation in flush-mounted boxes
• Width IK 8825 17.5 mm
• Can be switched off before the time expires
• Operating times between 0.5 ... 60 min., as required
• IK 8813 with permanent light switch and LED indicator for contact
position
• IK 8813 for installation in rows, width 17.5 mm
• OA 8823 for installation in flush-mounted boxes
• Can be switched off before the time expires
• Operating times between 0.5 ... 60 min., as required
• IK 8813 with permanent light switch and LED indicator for contact
position
• IK 8813 for installation in rows, width 17.5 mm
• OA 8823 for installation in flush-mounted boxes
• Reswitching possible
• Operating times between 0.5 ... 60 min., as required
• IK 8814 with permanent light switch and LED indicator for contact
position
• IK 8814 for installation in rows, width 17.5 mm
OA 8824 for installation in flush-mounted boxes
• Setting range: for long times 3 ... 60 min
• For 4-wire circuit L on push button and
3-wire circuit N on push button
• Light can be switched off and retriggered
• Switch for continuous light on unit
• Contact: 16 A
• Width 17.5 mm
• Setting range 0.5 ... 10 min
• After the light the fan switched on
• Switch for continuous light of the exhauster on unit
• Contact: 16 A
• Width 17.5 mm
• Reswitching possible
• Operating times between 0.5 ... 60 min., as required
• IK 8814 with permanent light switch and LED indicator for contact
position
• IK 8814 for installation in rows, width 17.5 mm
OA 8824 for installation in flush-mounted boxes
• Setting range: short pressing of button 0.5 ... 10 min
long pressing of button 2 ... 40 min
• For 4-wire circuit L on push button and
3-wire circuit N on push button
• Can be retriggered
• with pre-warning shortly before end of time
• Switch for continuous light on unit
• Contact: 16 A
• Width 17.5 mm
• Setting range 0.5 ... 10 min.
• For 4-wire circuit L on push button and
3-wire circuit N on push button
• Can be retriggered
• Switch for continuous light on unit
• Contact: 16 A
• Width 17.5 mm
• Setting range 0.5 ... 10 min
• After the light the fan switched on
• Switch for continuous light of the exhauster on unit
• Contact: 16 A
• Width 17.5 mm
• Impulse operation
• Pushbutton for manual actuation of the contact
• Operating position display
• Max. glow lamp load: 4 mA
• IK 8805: width 17.5 mm
IL 8805: width 35 mm

Innovative installation devices so that you aren't left standing in the dark
DOLD offers you a wide palette of products for installation technology. These basic devices for modern building automation ensure that you aren't left standing in the dark or ensure that energy is reasonably saved over the scope of the lighting controls. Alongside timers and remote switches, energy-saving switches and load shedding relays, additional installation devices, such as Venetian blinds switches, network relays or the innovative hybrid switch relays round out the coordinated DOLD programme of installation devices.
Свяжитесь с нами
Если вы не нашли нужной информации на сайте или у вас остались вопросы по товарам, оставьте заявку на бесплатную консультацию, и мы вам перезвоним








Ответ от производителя может занять до 5 дней и более.

