ABB – высокотехнологичная компания, лидирующая в разработке систем автоматизации промышленных производств. Её история началась ещё 130 лет назад, и сейчас филиалы ABB работают в 100 странах, а количество служащих превышает 135,000 человек.
Уже более 40 лет специалисты ABB занимаются разработкой инновационных технологий цифрового соединения и управления промышленным оборудованием и системами. За это время на предприятиях заказчиков были установлены и введены в эксплуатацию 70,000 систем управления, объединяющие более 70 миллионов устройств.
Каждый день компания выпускает новые решения безопасности, эффективности и продуктивности для коммунальной и промышленной сферы, транспорта и инфраструктуры по всему миру.
Вся продукция, системы и комплексные решения ABB разрабатываются с заботой об окружающей среде. Вредное воздействие на природу снижается за счёт повышения энергоэффективности и продуктивности оборудования.
Закажите в нашем магазине
Нужна редкая деталь? Закажем оригинал или надёжный аналог из Европы, США или Китая — по договору и с «белой» таможенной очисткой.
Long Description:The earthing terminal AM8 is mainly used for connecting the earthing conductors to various pipework in sizes Ø 8 - 28 mm. It is possible to adjust the terminal to suit to four different pipe thicknesses. The terminal has two 35 mm² pillar terminals. The conductor bar is made of tinned copper and the strap of zinc-plated steel. The pillar terminals are of zinc-plated and yellow passivated steel.
Long Description:The earthing terminal AM9 is mainly used to connect earthing conductors to various kinds of pipework, in sizes Ø 6-15 mm. The earthing terminal can also be used to connect earthing conductors to a building’s concrete reinforcement. A suitable concrete reinforcement bar has a diameter of between 8-15 mm. The earthing conductor has one 4-35 mm² strap. If there is a need for a 25 mm² copper connector, two AM9 terminals must be used in parallel. The conductor bar is made of tinned copper and the strap is made of zinc-plated, yellow-passivated steel.
Long Description:Inlet AN16 is equipped with locking device which prevents conduit disconnection. The conduit can be unfastened by twisting it. The inlet can be used both in mounting boxes and in junction boxes. Made of halogen free material (IEC/61249-2-21).
Long Description:Inlet AN20 is equipped with locking device which prevents conduit disconnection. The conduit can be unfastened by twisting it. The inlet can be used both in mounting boxes and in junction boxes. Made of halogen free material (IEC/61249-2-21).
Long Description:Facilitates easy inlet reduction from D20 (20 mm) to D16 (16 mm) when a D16 conduit needs to be connected into a D20 inlet. Made of halogen free material (IEC/61249-2-21).
Long Description:Inlet AN25 is equipped with locking device which prevents conduit disconnection. The conduit can be unfastened by twisting it. The inlet can be used both in mounting boxes and in junction boxes. Made of halogen free material (IEC/61249-2-21).
Long Description:The ANK20 angle inlet is equipped with locking device which prevents conduit disconnection. The conduit can be unfastened by twisting it. Angle inlet ANK20 is both right and left handed. The inlet can be used both in mounting boxes and in junction boxes. Made of halogen free material (IEC/61249-2-21).
Long Description:The back inlet is fitted with locking device. The conduit can be unfastened by twisting it. Inlet can be used both in mounting boxes and in junction boxes. Made of halogen free material (IEC/61249-2-21).
Long Description:The back inlet is fitted with locking device. The conduit can be unfastened by twisting it. Inlet can be used both in mounting boxes and in junction boxes. Made of halogen free material (IEC/61249-2-21).
Long Description:The back inlet is fitted with locking device. The conduit can be unfastened by twisting it. Inlet can be used both in mounting boxes and in junction boxes. Made of halogen free material (IEC/61249-2-21).
Long Description:The square junction box AP10 (6,0 mm², 400 V) is equipped with 10 membrane cable entries (Ø 19 mm) in the sides, and two on the bottom. Cables are easy to connect by simply inserting the stripped ends through the inlets. The box locks by snapping and can be opened by inserting a screwdriver (for example) into the opening slots - no screws are needed. The box can be furnished with strain-reliefs AS9, AS9.1 and AS9.3. Mounting temperature -15...+60 °C. Made of halogen free material (IEC/61249-2-21)
Long Description:The AP12 junction box has two 3-pole insulate 6 mm² connectors. The base plate offers a choice of eight different connection points for the connectors. In the bottom of the box there are three knock-outs. The cover has knock-outs in the corners and on the long sides of the cover. The maximum wire capacity per connector is 8 x 1,5 mm² or 5 x 2,5 mm².
Long Description:The AP6 square junction box is spacious and easy to wire. The box is equipped with an insulated 5-way connector. The transparent wire connector makes it easy to ensure sufficient wire depth. The maximum wire capacity per connector is 4 x 2,5 mm² or 6 x 1,5 mm². The box has 6 knock-outs, 2 of which are in the bottom. Made of halogen free material (IEC/61249-2-21).
Long Description:The round junction box AP7 (2,5 mm², 440 V) is similar to the AP9 and the AP10 and is equipped with 10 membrane cable entries (Ø 17 mm) and two in the bottom. Cables are easy to connect by simply inserting the stripped ends through the inlets. The cover is locked with two screws at distance of 78 mm. The box can be furnished with strain-reliefs AS9, AS9.1 and AS9.3. Made of halogen free material (IEC/61249-2-21).