Long Description:The PMR399 is 60 mm deep and is often used in renovating old houses, when adding 50 mm thermal insulation to inside walls while leaving existing conduit installations in place. The extension ring is attached to the old mounting box so as to extend it to the level of the new boarding.
Long Description:Low mounting boxes may be joined side by side by using a PMR474 interconnector, which must be cut to the height of the bottom of the box. Made of halogen free material (IEC/61249-2-21).
Long Description:The PMR490 interconnector is used to link together mounting boxes when groups of installation boxes that house weak and strong current circuits are installed under different coverplates. The centerplate distance of mounting boxes can be set at 85 mm when using a PMR490 interconnector. Made of halogen free material (IEC/61249-2-21).
Long Description:The connecting piece PMR502 is used when low-voltage or strong-current circuit box groups are installed under different cover plates. With connecting piece PMR502, the distance between box centers is 100 mm. Made of halogen free material (IEC/61249-2-21).
Long Description:In surface mounting, a cover is used to protect AM4 and AM5. The cover has provisions for the conductors to fit to the bar’s spacing and it is fixed on the wall with two screws.
Long Description:Support PMR577 is used with mounting and junction boxes with knock-out inlets. The support is used for installation of boxes into light, non-bearing walls that are constructed on site, with interlayers of 42, 45, 66, 70, 90 and 95 mm. It is possible to use an inlet or a strain-relief (conduitless flush mounting) with the support. By joining two supports PMR577 together with an interconnector PMR474 the box groups can be separated from each other under different covering plates. The center distance of the box groups is 85mm. Made of halogen free material (IEC/61249-2-21).
Long Description:Three extension rings are available for the standard mounting boxes. The lowest, PMR94 is 13 mm deep. Made of halogen free material (IEC/61249-2-21).
Long Description:Impressivo center plates for Jussi signalling products: FAP3011. Includes the needed parts to modify the Jussi signalling product to Impressivo design. Marking possibilities on button and name plate. Anthracite.
Long Description:Impressivo center plates for Jussi signalling products: FAP3011. Includes the needed parts to modify the Jussi signalling product to Impressivo design. Marking possibilities on button and name plate. Aluminum.
Long Description:Impressivo center plates for Jussi signalling products: FAP3011. Includes the needed parts to modify the Jussi signalling product to Impressivo design. Marking possibilities on button and name plate. White.