Long Description:When the thermostat is on, the LED displays either a green or red light. The LED displays a red light during the heating period. _x000D__x000D_Set the room temperature to the desired value with the round adjustment knob; the adjustment range is +5...+35 °C _x000D__x000D_Set the maximum floor temperature by turning the adjustment screw in the top left corner; the adjustment range is +20...+50 °C. _x000D_When the thermostat is used to adjust a floor heating element heating a floor made of wood or corresponding material, never set the maximum floor temperature to over +35 °C (factory setting), or according to the floor material manufacturer’s instructions. _x000D__x000D_The device measures the temperature inside the floor, which differs from the floor’s surface temperature. _x000D_Freezing protection: Set the adjustment knob to position 5, and the thermostat will keep room temperature at +5 °C. _x000D__x000D_Temperature limiting: There are limiting pins under the adjustment knobs that use to limit the movement of the adjustment knob. Move the pins to the desired position to set the maximum and minimum temperatures. _x000D_• 230 V~_x000D_• 50 Hz_x000D_• 15 A _x000D_• 3450 W_x000D_• IP 31_x000D_• Doubleinsulated_x000D_• Sensor: 3 m NTC 15 kΩ / 25 °C_x000D_• Operating temperature: -10…+30 °C_x000D_• Switch: 2-pole_x000D_• Screw terminals: max. 2x2.5 mm2_x000D_• Temperature drop: fixed 5 °C_x000D_• Adjustment range: +5…+ 45 °C_x000D_• Hysteresis +/- 0.4 °C
Long Description:When the thermostat is on, the LED displays either a green or red light. The LED displays a red light during the heating period. _x000D__x000D_Set the room temperature to the desired value with the round adjustment knob; the adjustment range is +5...+35 °C _x000D__x000D_Set the maximum floor temperature by turning the adjustment screw in the top left corner; the adjustment range is +20...+50 °C. _x000D_When the thermostat is used to adjust a floor heating element heating a floor made of wood or corresponding material, never set the maximum floor temperature to over +35 °C (factory setting), or according to the floor material manufacturer’s instructions. _x000D__x000D_The device measures the temperature inside the floor, which differs from the floor’s surface temperature. _x000D_Freezing protection: Set the adjustment knob to position 5, and the thermostat will keep room temperature at +5 °C. _x000D__x000D_Temperature limiting: There are limiting pins under the adjustment knobs that use to limit the movement of the adjustment knob. Move the pins to the desired position to set the maximum and minimum temperatures. _x000D_• 230 V~_x000D_• 50 Hz_x000D_• 15 A _x000D_• 3450 W_x000D_• IP 31_x000D_• Doubleinsulated_x000D_• Sensor: 3 m NTC 15 kΩ / 25 °C_x000D_• Operating temperature: -10…+30 °C_x000D_• Switch: 2-pole_x000D_• Screw terminals: max. 2x2.5 mm2_x000D_• Temperature drop: fixed 5 °C_x000D_• Adjustment range: +5…+ 45 °C_x000D_• Hysteresis +/- 0.4 °C
Long Description:When the thermostat is on, the LED displays either a green or red light. The LED displays a red light during the heating period. _x000D__x000D_Set the room temperature to the desired value with the round adjustment knob; the adjustment range is +5...+35 °C _x000D__x000D_Set the maximum floor temperature by turning the adjustment screw in the top left corner; the adjustment range is +20...+50 °C. _x000D_When the thermostat is used to adjust a floor heating element heating a floor made of wood or corresponding material, never set the maximum floor temperature to over +35 °C (factory setting), or according to the floor material manufacturer’s instructions. _x000D__x000D_The device measures the temperature inside the floor, which differs from the floor’s surface temperature. _x000D_Freezing protection: Set the adjustment knob to position 5, and the thermostat will keep room temperature at +5 °C. _x000D__x000D_Temperature limiting: There are limiting pins under the adjustment knobs that use to limit the movement of the adjustment knob. Move the pins to the desired position to set the maximum and minimum temperatures. _x000D_• 230 V~_x000D_• 50 Hz_x000D_• 15 A _x000D_• 3450 W_x000D_• IP 31_x000D_• Doubleinsulated_x000D_• Sensor: 3 m NTC 15 kΩ / 25 °C_x000D_• Operating temperature: -10…+30 °C_x000D_• Switch: 2-pole_x000D_• Screw terminals: max. 2x2.5 mm2_x000D_• Temperature drop: fixed 5 °C_x000D_• Adjustment range: +5…+ 45 °C_x000D_• Hysteresis +/- 0.4 °C
Long Description:When the thermostat is on, the LED displays either a green or red light. The LED displays a red light during the heating period. _x000D__x000D_Set the room temperature to the desired value with the round adjustment knob; the adjustment range is +5...+35 °C _x000D__x000D_Set the maximum floor temperature by turning the adjustment screw in the top left corner; the adjustment range is +20...+50 °C. _x000D_When the thermostat is used to adjust a floor heating element heating a floor made of wood or corresponding material, never set the maximum floor temperature to over +35 °C (factory setting), or according to the floor material manufacturer’s instructions. _x000D__x000D_The device measures the temperature inside the floor, which differs from the floor’s surface temperature. _x000D_Freezing protection: Set the adjustment knob to position 5, and the thermostat will keep room temperature at +5 °C. _x000D__x000D_Temperature limiting: There are limiting pins under the adjustment knobs that use to limit the movement of the adjustment knob. Move the pins to the desired position to set the maximum and minimum temperatures. _x000D_• 230 V~_x000D_• 50 Hz_x000D_• 15 A _x000D_• 3450 W_x000D_• IP 31_x000D_• Doubleinsulated_x000D_• Sensor: 3 m NTC 15 kΩ / 25 °C_x000D_• Operating temperature: -10…+30 °C_x000D_• Switch: 2-pole_x000D_• Screw terminals: max. 2x2.5 mm2_x000D_• Temperature drop: fixed 5 °C_x000D_• Adjustment range: +5…+ 45 °C_x000D_• Hysteresis +/- 0.4 °C