Long Description:The electronic latching relays guarantees maximum reliabality, life and noiseless operation. The 260 C version also allows centralized reset function (ON/OFF).
Long Description:The electronic latching relays guarantees maximum reliabality, life and noiseless operation. The 260 C version also allows centralized reset function (ON/OFF).
Long Description:The electronic latching relays guarantees maximum reliabality, life and noiseless operation. The 260 C version also allows centralized reset function (ON/OFF).
Long Description:Module for plugging into the Room Controller Basis Device. It switches currents up to 16 A with two relays. The maximum continuous current is 6 A.
Long Description:Module for plugging into the Room Controller Basis Device. They control two independent blind or shutter drives with 115/230 V AC. Special functions: Move to position and sun protection automatic control.
Long Description:Module for plugging into the Room Controller Basis Device. They control two independent blind or shutter drives with 24 V DC. Special functions: Move to position and sun protection automatic control.
Long Description:Module for plugging into the Room Controller Basis Device.It has 4 inputs for the connection of 230 V contacts (AC or DC). The voltage is provided by the module.
Long Description:Module for plugging into the Room Controller Basis Device. It has 4 inputs for the connection of 12/24 V contacts (AC or DC). The voltage has to be provided externally.
Long Description:The USB interface enables the communication between the PC and the EIB/KNX system. Display of data transfer via EIB LED and USB LED. The USB interface can be used starting with ETS 3.0.
Catalog Description:DSA/S2.16.1 DALI Switch Act, 2fold, 16A
Long Description:Switch Actuator, 2-fold, 16AX, C-Load with DALI interface. Potential free contacts to switch 2 independent electrical loads via DALI control (Digital Addressable Lighting Interface). Manual operation and display of the switching state of the contacts.
Long Description:Module for plugging into the Room Controller Basis Device. It dims incandescent lamps, 230 V or low halogen lamps with up to 300 W/VA. Automatic load detection. Compensated against ripple-control and voltage fluctuations. Only 2 W minimum load.
Catalog Description:ES/M2.230.1 Elec Switch Act Mod 2F 230V
Long Description:Module for plugging into the Room Controller Basis Device. It has two overload-proof, noise-free and wear-resistant outputs for the control of electrothermal valve drives with a voltage of 115/230 V AC/DC, max. 700 mA continuous current.
Long Description:Module for plugging into the Room Controller Basis Device. It has two overload-proof, noise-free and wear-resistant outputs for the control of electrothermal valve drives with a voltage of 12/24 V AC/DC, max. 700 mA continuous current.
Long Description:Provides logic functions to built up a security system in small and medium-sized KNX installations in combination with other KNX devices, e.g. zone terminals, motion detectors. Up to 64 different zones. Internal relay can be used for alarming.
Long Description:DALI gateway, 8-fold, MDRC_x000D_ For controlling DALI devices (electronic ballasts, transformers etc.) via the ABB i-bus®. There are 8 separate, independent DALI outputs/channels available. Up to 16 DALI devices can be connected per channel with a maximu
Long Description:DALI Gateway, 1-fold, MDRC_x000D_ For controlling DALI devices (electronic ballasts, transformers etc.) via the ABB i-bus®. Up to 128 DALI devices are individually addressable. 64 DALI slaves can be individually and directly switched, dimmed and brightnes
Long Description:It controls four independent groups (broadcast) with up to four SMI (Standard Motor Interface) drives (230 V) for positioning blinds, roller shutters, awnings and other shading products. Status signals (motor fault, direction of movement) can also be sent
Long Description:For decoupling the bus line from the power supply. The device has a reset switch for isolating the bus voltage and resetting the bus devices connected to this line. Connedtion to ABB i-bus® via Bus Connection Terminal. No Data Rail required.
Long Description:Controls thermoelectric valve drives (e.g. TSA/K) in heating and cooling systems. Each output (24...230 V AC/DC) is protected against short-circuit and overload. With manual operation and status display for each output.