Long Description:Wall cabinets for distribution board construction, grounded, for indoor use IP43 - IN 250A (400A)- Enclosure made of 1 mm sheet steel and door made of 1.25 mm sheet steel- RAL 9016 powder-coated- Prepared for the installation of standard panels or a mounting plate made of galvanised sheet steel- Double-wing doors for cabinets 3 panels wide or more- Door opening angle 130 degrees- With casement fastener ZB 113 as standard- Flange openings at the top and knock outs are provided at the bottom and sides- Membrane flanges mounted at the top (per panel width)
Long Description:Wall cabinets for distribution board construction, grounded, for indoor use IP43 - IN 250A (400A)- Enclosure made of 1 mm sheet steel and door made of 1.25 mm sheet steel- RAL 9016 powder-coated- Prepared for the installation of standard panels or a mounting plate made of galvanised sheet steel- Double-wing doors for cabinets 3 panels wide or more- Door opening angle 130 degrees- With casement fastener ZB 113 as standard- Flange openings at the top and knock outs are provided at the bottom and sides- Membrane flanges mounted at the top (per panel width)
Long Description:Wall cabinets for distribution board construction,double insulated, for indoor use IP31 - IN 250A (400A)- Flush wall box of electrolytically galvanised sheet steel, 1 mm, with recessed plastic profile for double insulation- Trim frame with sheet steel door, adjustment to the plaster surface 35 mm- RAL 9016 powder-coated- Prepared for the installation of meter and distribution board panels- Double-wing doors for cabinets 3 panels wide or more- Door opening angle 130 degrees- With casement fastener ZB 113 as standard- Nipple flange ZB 39 included- Cabinet depth 200mm
Catalog Description:4/4W Wall Cabinet IP55 Empty cabinets for surface mounting and partially recessed mounting, grounded, IP55
Long Description:Empty cabinets for surface mounting and partially recessed mounting, grounded, IP55 - IN 400A (630A) - Enclosure made of 1.5 mm sheet steel, door made of 2 mm sheet steel - RAL 7035 powder-coated - For the installation of standard panels or a mounting plate made of galvanised sheet steel - Double-wing doors for cabinets 4 panels wide or more - Door opening angle 120 degrees - Doors with espagnolette closure - Standard closure: double bit 3 mm - One flange opening per panel width is cut out at the top and bottom, knockouts are provided at the sides. - The top and bottom flange openings can optionally be closed with a nipple flange, sponge rubber flange or closure flange. (Flanges must be ordered separately.) - With external fixing straps
Long Description:Wall cabinets for distribution board construction, grounded, for indoor use IP43 - IN 250A (400A)- Enclosure made of 1 mm sheet steel and door made of 1.25 mm sheet steel- RAL 9016 powder-coated- Prepared for the installation of standard panels or a mounting plate made of galvanised sheet steel- Double-wing doors for cabinets 3 panels wide or more- Door opening angle 130 degrees- With casement fastener ZB 113 as standard- Flange openings at the top and knock outs are provided at the bottom and sides- Membrane flanges mounted at the top (per panel width)
Long Description:Wall cabinets for distribution board construction,double insulated, for indoor use IP31 - IN 250A (400A)- Flush wall box of electrolytically galvanised sheet steel, 1 mm, with recessed plastic profile for double insulation- Trim frame with sheet steel door, adjustment to the plaster surface 35 mm- RAL 9016 powder-coated- Prepared for the installation of meter and distribution board panels- Double-wing doors for cabinets 3 panels wide or more- Door opening angle 130 degrees- With casement fastener ZB 113 as standard- Nipple flange ZB 39 included- Cabinet depth 200mm